[PATCH 109/149] global: Migrate CONFIG_RESET_VECTOR_ADDRESS to CFG

Tom Rini trini at konsulko.com
Sun Dec 4 16:13:40 CET 2022


Perform a simple rename of CONFIG_RESET_VECTOR_ADDRESS to CFG_RESET_VECTOR_ADDRESS

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/powerpc/cpu/mpc85xx/Kconfig     |  2 +-
 arch/powerpc/cpu/mpc85xx/u-boot.lds  |  4 ++--
 arch/powerpc/dts/kmcent2-u-boot.dtsi |  2 +-
 arch/powerpc/dts/u-boot.dtsi         |  6 +++---
 board/freescale/p1_p2_rdb_pc/README  |  2 +-
 board/freescale/p2041rdb/README      |  2 +-
 board/freescale/t104xrdb/README      |  2 +-
 board/freescale/t208xqds/README      |  2 +-
 board/freescale/t208xrdb/README      |  2 +-
 include/configs/P1010RDB.h           |  8 ++++----
 include/configs/P2041RDB.h           |  8 ++++----
 include/configs/T102xRDB.h           | 10 +++++-----
 include/configs/T104xRDB.h           |  8 ++++----
 include/configs/T208xQDS.h           | 10 +++++-----
 include/configs/T208xRDB.h           | 10 +++++-----
 include/configs/T4240RDB.h           |  8 ++++----
 include/configs/kmcent2.h            |  2 +-
 include/configs/p1_p2_rdb_pc.h       |  4 ++--
 18 files changed, 46 insertions(+), 46 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 3275d4fa9b88..6ab8a5249a42 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -931,7 +931,7 @@ config ARCH_T4240
 	imply FSL_SATA
 
 config MPC85XX_HAVE_RESET_VECTOR
-	bool "Indicate reset vector at CONFIG_RESET_VECTOR_ADDRESS - 0xffc"
+	bool "Indicate reset vector at CFG_RESET_VECTOR_ADDRESS - 0xffc"
 	depends on MPC85xx
 
 config BTB
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index fa3aa954cbb5..3af0dfdf336b 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -5,8 +5,8 @@
 
 #include "config.h"
 
-#ifdef CONFIG_RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS	CONFIG_RESET_VECTOR_ADDRESS
+#ifdef CFG_RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS	CFG_RESET_VECTOR_ADDRESS
 #else
 #define RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
diff --git a/arch/powerpc/dts/kmcent2-u-boot.dtsi b/arch/powerpc/dts/kmcent2-u-boot.dtsi
index 28f303b749e9..53bac5533f24 100644
--- a/arch/powerpc/dts/kmcent2-u-boot.dtsi
+++ b/arch/powerpc/dts/kmcent2-u-boot.dtsi
@@ -91,7 +91,7 @@
 			align = <256>;
 		};
 		powerpc-mpc85xx-bootpg-resetvec {
-			offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
+			offset = <(CFG_RESET_VECTOR_ADDRESS - 0xffc)>;
 		};
 	};
 };
diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
index b4b5257362e5..6b7375cff215 100644
--- a/arch/powerpc/dts/u-boot.dtsi
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -23,11 +23,11 @@
 		u-boot-dtb-with-ucode {
 			align = <4>;
 		};
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 		powerpc-mpc85xx-bootpg-resetvec {
-			offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
+			offset = <(CFG_RESET_VECTOR_ADDRESS - 0xffc)>;
 		};
 	};
 };
diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README
index f542decec79b..fd849bfc29a2 100644
--- a/board/freescale/p1_p2_rdb_pc/README
+++ b/board/freescale/p1_p2_rdb_pc/README
@@ -57,7 +57,7 @@ enabled in relative defconfig file,
 1. CONFIG_DEFAULT_DEVICE_TREE="p1020rdb" (Change default device tree name if required)
 2. CONFIG_OF_CONTROL
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+   CFG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
 1. use 'u-boot.bin' for NOR boot.
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 96612daeeb11..ae7702773723 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -98,7 +98,7 @@ enabled in relative defconfig file,
 1. CONFIG_DEFAULT_DEVICE_TREE="p2041rdb" (Change default device tree name if required)
 2. CONFIG_OF_CONTROL
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+   CFG_RESET_VECTOR_ADDRESS - 0xffc
 
 CPLD command
 ============
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index e90dca416639..f312e6a3e32b 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -379,7 +379,7 @@ enabled in relative defconfig file,
 1. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required)
 2. CONFIG_OF_CONTROL
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+   CFG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
 1. use 'u-boot.bin' for NOR boot.
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 63953d6b9b66..0d80c6901fb2 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -285,7 +285,7 @@ enabled in relative defconfig file,
 1. CONFIG_DEFAULT_DEVICE_TREE="t2080qds" (Change default device tree name if required)
 2. CONFIG_OF_CONTROL
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+   CFG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
 1. use 'u-boot.bin' for NOR boot.
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index 60551f6723e6..533054bfe192 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -281,7 +281,7 @@ enabled in relative defconfig file,
 1. CONFIG_DEFAULT_DEVICE_TREE="t2080rdb" (Change default device tree name if required)
 2. CONFIG_OF_CONTROL
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
-   CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+   CFG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
 1. use 'u-boot.bin' for NOR boot.
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index b57e8638ab71..9efae58ce903 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -24,7 +24,7 @@
 
 #ifdef CONFIG_SPIFLASH
 #ifdef CONFIG_NXP_ESBC
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
+#define CFG_RESET_VECTOR_ADDRESS	0x110bfffc
 #else
 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE	(512 << 10)
 #define CFG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
@@ -52,11 +52,11 @@
 #endif
 
 #ifdef CONFIG_NAND_SECBOOT	/* NAND Boot */
-#define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
+#define CFG_RESET_VECTOR_ADDRESS	0x110bfffc
 #endif
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 /* High Level Configuration Options */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 6e755fc0a8f5..28f53ae78a1c 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,7 +12,7 @@
 #define __CONFIG_H
 
 #ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
@@ -20,13 +20,13 @@
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 
 /* High Level Configuration Options */
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 #define CFG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 063b864f9ff0..7ee46abffdb6 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -28,7 +28,7 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
+#define CFG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
 #define CFG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
@@ -36,7 +36,7 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS	0x30000FFC
+#define CFG_RESET_VECTOR_ADDRESS	0x30000FFC
 #define CFG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_MMC_U_BOOT_DST	(0x30000000)
 #define CFG_SYS_MMC_U_BOOT_START	(0x30000000)
@@ -45,8 +45,8 @@
 
 #endif /* CONFIG_RAMBOOT_PBL */
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 /*
@@ -87,7 +87,7 @@
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS	\
 		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 
 /*
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 9d04d30a5387..f196bd76e6ec 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -29,7 +29,7 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
+#define	CFG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_SPI_FLASH_U_BOOT_DST		(0x30000000)
 #define CFG_SYS_SPI_FLASH_U_BOOT_START	(0x30000000)
@@ -37,7 +37,7 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x30000FFC
+#define	CFG_RESET_VECTOR_ADDRESS		0x30000FFC
 #define CFG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_MMC_U_BOOT_DST	(0x30000000)
 #define CFG_SYS_MMC_U_BOOT_START	(0x30000000)
@@ -48,8 +48,8 @@
 
 /* High Level Configuration Options */
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 #define CFG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 3b98d25aa47a..2023d7497f69 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -30,7 +30,7 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x200FFC
+#define	CFG_RESET_VECTOR_ADDRESS		0x200FFC
 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_SPI_FLASH_U_BOOT_DST		(0x00200000)
 #define CFG_SYS_SPI_FLASH_U_BOOT_START	(0x00200000)
@@ -38,7 +38,7 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define	CONFIG_RESET_VECTOR_ADDRESS		0x200FFC
+#define	CFG_RESET_VECTOR_ADDRESS		0x200FFC
 #define CFG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_MMC_U_BOOT_DST	(0x00200000)
 #define CFG_SYS_MMC_U_BOOT_START	(0x00200000)
@@ -52,11 +52,11 @@
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 /*
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 60c2947bfc1d..f213d2de770c 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -30,7 +30,7 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CFG_RESET_VECTOR_ADDRESS             0x200FFC
 #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CFG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
 #define CFG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
@@ -38,7 +38,7 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CFG_RESET_VECTOR_ADDRESS             0x200FFC
 #define CFG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CFG_SYS_MMC_U_BOOT_DST      (0x00200000)
 #define CFG_SYS_MMC_U_BOOT_START    (0x00200000)
@@ -52,11 +52,11 @@
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
 #define CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 		(0x300000000ull | CFG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
-#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS 0xfffffffc
 #endif
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 /*
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 01a9f43cbaeb..506f1b7e268b 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -16,13 +16,13 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #ifndef CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
+#define CFG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
 #define RESET_VECTOR_OFFSET		0x27FFC
 #define BOOT_PAGE_OFFSET		0x27000
 
 #ifdef	CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS	0x200FFC
+#define CFG_RESET_VECTOR_ADDRESS	0x200FFC
 #define CFG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
 #define CFG_SYS_MMC_U_BOOT_DST	0x00200000
 #define CFG_SYS_MMC_U_BOOT_START	0x00200000
@@ -34,8 +34,8 @@
 
 /* High Level Configuration Options */
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 #define CFG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index 1dff1531c73a..1eaf1968321c 100644
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -133,7 +133,7 @@
 
 /* High Level Configuration Options */
 
-#define CONFIG_RESET_VECTOR_ADDRESS	0xebfffffc
+#define CFG_RESET_VECTOR_ADDRESS	0xebfffffc
 
 #define CFG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
 
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 41e7f53bd57e..832ad9c3ece0 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -105,8 +105,8 @@
 #endif /* not CONFIG_TPL_BUILD */
 #endif
 
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#ifndef CFG_RESET_VECTOR_ADDRESS
+#define CFG_RESET_VECTOR_ADDRESS	0xeffffffc
 #endif
 
 #define CFG_SYS_CCSRBAR		0xffe00000
-- 
2.25.1



More information about the U-Boot mailing list