[PATCH v3 2/2] pmic: pca9450: Add regulator driver
Heiko Thiery
heiko.thiery at gmail.com
Sun Jun 19 17:16:01 CEST 2022
Hi Marek,
Am Mi., 13. Apr. 2022 um 00:40 Uhr schrieb Marek Vasut <marex at denx.de>:
>
> Add PCA9450 regulator driver. This is complementary driver for the BUCKn
> and LDOn regulators provided by the PCA9450 PMIC driver. Currently the
> driver permits reading the settngs and configuring the BUCKn and LDOn
> regulators.
>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> V2: Add RB by Fabio
> V3: Rebase on u-boot-imx/master
> ---
> drivers/power/pmic/pca9450.c | 6 +-
> drivers/power/regulator/Kconfig | 15 ++
> drivers/power/regulator/Makefile | 1 +
> drivers/power/regulator/pca9450.c | 333 ++++++++++++++++++++++++++++++
> include/power/pca9450.h | 11 +
> 5 files changed, 363 insertions(+), 3 deletions(-)
> create mode 100644 drivers/power/regulator/pca9450.c
>
> diff --git a/drivers/power/pmic/pca9450.c b/drivers/power/pmic/pca9450.c
> index 26c876c9c45..116ac49a8db 100644
> --- a/drivers/power/pmic/pca9450.c
> +++ b/drivers/power/pmic/pca9450.c
> @@ -83,9 +83,9 @@ static struct dm_pmic_ops pca9450_ops = {
> };
>
> static const struct udevice_id pca9450_ids[] = {
> - { .compatible = "nxp,pca9450a", .data = 0x25, },
> - { .compatible = "nxp,pca9450b", .data = 0x25, },
> - { .compatible = "nxp,pca9450c", .data = 0x25, },
> + { .compatible = "nxp,pca9450a", .data = NXP_CHIP_TYPE_PCA9450A, },
> + { .compatible = "nxp,pca9450b", .data = NXP_CHIP_TYPE_PCA9450BC, },
> + { .compatible = "nxp,pca9450c", .data = NXP_CHIP_TYPE_PCA9450BC, },
> { }
> };
>
> diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
> index cd253b95f2f..d486bad6bdc 100644
> --- a/drivers/power/regulator/Kconfig
> +++ b/drivers/power/regulator/Kconfig
> @@ -60,6 +60,21 @@ config SPL_DM_REGULATOR_BD71837
> This config enables implementation of driver-model regulator uclass
> features for regulators on ROHM BD71837 and BD71847 in SPL.
>
> +config DM_REGULATOR_PCA9450
> + bool "Enable Driver Model for NXP PCA9450 regulators"
> + depends on DM_REGULATOR && DM_PMIC_PCA9450
> + help
> + This config enables implementation of driver-model regulator uclass
> + features for regulators on NXP PCA9450 PMICs. PCA9450 contains 6 bucks
> + and 5 LDOS. The driver implements get/set api for value and enable.
> +
> +config SPL_DM_REGULATOR_PCA9450
> + bool "Enable Driver Model for NXP PCA9450 regulators in SPL"
> + depends on DM_REGULATOR_PCA9450
> + help
> + This config enables implementation of driver-model regulator uclass
> + features for regulators on ROHM PCA9450 in SPL.
> +
> config DM_REGULATOR_DA9063
> bool "Enable Driver Model for REGULATOR DA9063"
> depends on DM_REGULATOR && DM_PMIC_DA9063
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> index 4efb32a3228..d2d17f7aed0 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
> obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
> obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
> obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
> +obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o
> obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
> obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
> obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
> diff --git a/drivers/power/regulator/pca9450.c b/drivers/power/regulator/pca9450.c
> new file mode 100644
> index 00000000000..4847c9f90f0
> --- /dev/null
> +++ b/drivers/power/regulator/pca9450.c
> @@ -0,0 +1,333 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * NXP PCA9450 regulator driver
> + * Copyright (C) 2022 Marek Vasut <marex at denx.de>
> + *
> + * Largely based on:
> + * ROHM BD71837 regulator driver
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <log.h>
> +#include <linux/bitops.h>
> +#include <power/pca9450.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +
> +#define HW_STATE_CONTROL 0
> +#define DEBUG
> +
> +/**
> + * struct pca9450_vrange - describe linear range of voltages
> + *
> + * @min_volt: smallest voltage in range
> + * @step: how much voltage changes at each selector step
> + * @min_sel: smallest selector in the range
> + * @max_sel: maximum selector in the range
> + */
> +struct pca9450_vrange {
> + unsigned int min_volt;
> + unsigned int step;
> + u8 min_sel;
> + u8 max_sel;
> +};
> +
> +/**
> + * struct pca9450_plat - describe regulator control registers
> + *
> + * @name: name of the regulator. Used for matching the dt-entry
> + * @enable_reg: register address used to enable/disable regulator
> + * @enablemask: register mask used to enable/disable regulator
> + * @volt_reg: register address used to configure regulator voltage
> + * @volt_mask: register mask used to configure regulator voltage
> + * @ranges: pointer to ranges of regulator voltages and matching register
> + * values
> + * @numranges: number of voltage ranges pointed by ranges
> + * @dvs: whether the voltage can be changed when regulator is enabled
> + */
> +struct pca9450_plat {
> + const char *name;
> + u8 enable_reg;
> + u8 enablemask;
> + u8 volt_reg;
> + u8 volt_mask;
> + struct pca9450_vrange *ranges;
> + unsigned int numranges;
> + bool dvs;
> +};
> +
> +#define PCA_RANGE(_min, _vstep, _sel_low, _sel_hi) \
> +{ \
> + .min_volt = (_min), .step = (_vstep), \
> + .min_sel = (_sel_low), .max_sel = (_sel_hi), \
> +}
> +
> +#define PCA_DATA(_name, enreg, enmask, vreg, vmask, _range, _dvs) \
> +{ \
> + .name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
> + .volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
> + .numranges = ARRAY_SIZE(_range), .dvs = (_dvs), \
> +}
> +
> +static struct pca9450_vrange pca9450_buck123_vranges[] = {
> + PCA_RANGE(600000, 12500, 0, 0x7f),
> +};
> +
> +static struct pca9450_vrange pca9450_buck456_vranges[] = {
> + PCA_RANGE(600000, 25000, 0, 0x70),
> + PCA_RANGE(3400000, 0, 0x71, 0x7f),
> +};
> +
> +static struct pca9450_vrange pca9450_ldo1_vranges[] = {
> + PCA_RANGE(1600000, 100000, 0x0, 0x3),
> + PCA_RANGE(3000000, 100000, 0x4, 0x7),
> +};
> +
> +static struct pca9450_vrange pca9450_ldo2_vranges[] = {
> + PCA_RANGE(800000, 50000, 0x0, 0x7),
> +};
> +
> +static struct pca9450_vrange pca9450_ldo34_vranges[] = {
> + PCA_RANGE(800000, 100000, 0x0, 0x19),
> + PCA_RANGE(3300000, 0, 0x1a, 0x1f),
> +};
> +
> +static struct pca9450_vrange pca9450_ldo5_vranges[] = {
> + PCA_RANGE(1800000, 100000, 0x0, 0xf),
> +};
> +
> +/*
> + * We use enable mask 'HW_STATE_CONTROL' to indicate that this regulator
> + * must not be enabled or disabled by SW. The typical use-case for PCA9450
> + * is powering NXP i.MX8. In this use-case we (for now) only allow control
> + * for BUCK4, BUCK5, BUCK6 which are not boot critical.
> + */
> +static struct pca9450_plat pca9450_reg_data[] = {
> + /* Bucks 1-3 which support dynamic voltage scaling */
> + PCA_DATA("BUCK1", PCA9450_BUCK1CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK1OUT_DVS0, DVS_BUCK_RUN_MASK,
> + pca9450_buck123_vranges, true),
> + PCA_DATA("BUCK2", PCA9450_BUCK2CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK2OUT_DVS0, DVS_BUCK_RUN_MASK,
> + pca9450_buck123_vranges, true),
> + PCA_DATA("BUCK3", PCA9450_BUCK3CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK3OUT_DVS0, DVS_BUCK_RUN_MASK,
> + pca9450_buck123_vranges, true),
> + /* Bucks 4-6 which do not support dynamic voltage scaling */
> + PCA_DATA("BUCK4", PCA9450_BUCK4CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK4OUT, DVS_BUCK_RUN_MASK,
> + pca9450_buck456_vranges, false),
> + PCA_DATA("BUCK5", PCA9450_BUCK5CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK5OUT, DVS_BUCK_RUN_MASK,
> + pca9450_buck456_vranges, false),
> + PCA_DATA("BUCK6", PCA9450_BUCK6CTRL, HW_STATE_CONTROL,
> + PCA9450_BUCK6OUT, DVS_BUCK_RUN_MASK,
> + pca9450_buck456_vranges, false),
> + /* LDOs */
> + PCA_DATA("LDO1", PCA9450_LDO1CTRL, HW_STATE_CONTROL,
> + PCA9450_LDO1CTRL, PCA9450_LDO12_MASK,
> + pca9450_ldo1_vranges, false),
> + PCA_DATA("LDO2", PCA9450_LDO2CTRL, HW_STATE_CONTROL,
> + PCA9450_LDO2CTRL, PCA9450_LDO12_MASK,
> + pca9450_ldo2_vranges, false),
> + PCA_DATA("LDO3", PCA9450_LDO3CTRL, HW_STATE_CONTROL,
> + PCA9450_LDO3CTRL, PCA9450_LDO34_MASK,
> + pca9450_ldo34_vranges, false),
> + PCA_DATA("LDO4", PCA9450_LDO4CTRL, HW_STATE_CONTROL,
> + PCA9450_LDO4CTRL, PCA9450_LDO34_MASK,
> + pca9450_ldo34_vranges, false),
> + PCA_DATA("LDO5", PCA9450_LDO5CTRL_H, HW_STATE_CONTROL,
> + PCA9450_LDO5CTRL_H, PCA9450_LDO5_MASK,
> + pca9450_ldo5_vranges, false),
> +};
> +
> +static int vrange_find_value(struct pca9450_vrange *r, unsigned int sel,
> + unsigned int *val)
> +{
> + if (!val || sel < r->min_sel || sel > r->max_sel)
> + return -EINVAL;
> +
> + *val = r->min_volt + r->step * (sel - r->min_sel);
> + return 0;
> +}
> +
> +static int vrange_find_selector(struct pca9450_vrange *r, int val,
> + unsigned int *sel)
> +{
> + int ret = -EINVAL;
> + int num_vals = r->max_sel - r->min_sel + 1;
> +
> + if (val >= r->min_volt &&
> + val <= r->min_volt + r->step * (num_vals - 1)) {
> + if (r->step) {
> + *sel = r->min_sel + ((val - r->min_volt) / r->step);
> + ret = 0;
> + } else {
> + *sel = r->min_sel;
> + ret = 0;
> + }
> + }
> + return ret;
> +}
> +
> +static int pca9450_get_enable(struct udevice *dev)
> +{
> + struct pca9450_plat *plat = dev_get_plat(dev);
> + int val;
> +
> + /*
> + * boot critical regulators on pca9450 must not be controlled by sw
> + * due to the 'feature' which leaves power rails down if pca9450 is
> + * reseted to snvs state. hence we can't get the state here.
> + *
> + * if we are alive it means we probably are on run state and
> + * if the regulator can't be controlled we can assume it is
> + * enabled.
> + */
> + if (plat->enablemask == HW_STATE_CONTROL)
> + return 1;
> +
> + val = pmic_reg_read(dev->parent, plat->enable_reg);
> + if (val < 0)
> + return val;
> +
> + return (val & plat->enablemask);
> +}
> +
> +static int pca9450_set_enable(struct udevice *dev, bool enable)
> +{
> + int val = 0;
> + struct pca9450_plat *plat = dev_get_plat(dev);
> +
> + /*
> + * boot critical regulators on pca9450 must not be controlled by sw
> + * due to the 'feature' which leaves power rails down if pca9450 is
> + * reseted to snvs state. Hence we can't set the state here.
> + */
> + if (plat->enablemask == HW_STATE_CONTROL)
> + return enable ? 0 : -EINVAL;
> +
> + if (enable)
> + val = plat->enablemask;
> +
> + return pmic_clrsetbits(dev->parent, plat->enable_reg, plat->enablemask,
> + val);
> +}
> +
> +static int pca9450_get_value(struct udevice *dev)
> +{
> + struct pca9450_plat *plat = dev_get_plat(dev);
> + unsigned int reg, tmp;
> + int i, ret;
> +
> + ret = pmic_reg_read(dev->parent, plat->volt_reg);
> + if (ret < 0)
> + return ret;
> +
> + reg = ret;
> + reg &= plat->volt_mask;
> +
> + for (i = 0; i < plat->numranges; i++) {
> + struct pca9450_vrange *r = &plat->ranges[i];
> +
> + if (!vrange_find_value(r, reg, &tmp))
> + return tmp;
> + }
> +
> + pr_err("Unknown voltage value read from pmic\n");
> +
> + return -EINVAL;
> +}
> +
> +static int pca9450_set_value(struct udevice *dev, int uvolt)
> +{
> + struct pca9450_plat *plat = dev_get_plat(dev);
> + unsigned int sel;
> + int i, found = 0;
> +
> + /*
> + * An under/overshooting may occur if voltage is changed for other
> + * regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
> + * change to protect the HW
> + */
To be able to configure the pmic/regulators during startup by the dm
(regulators_enable_boot_on) I think we have to
remove the checks for the permit. Otherwise the automatic configuration on hand
of the dtb settings won't work.
> + if (!plat->dvs)
> + if (pca9450_get_enable(dev)) {
> + /* If the value is already set, skip the warning. */
> + if (pca9450_get_value(dev) == uvolt)
> + return 0;
> + pr_err("Only DVS bucks can be changed when enabled\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < plat->numranges; i++) {
> + struct pca9450_vrange *r = &plat->ranges[i];
> +
> + found = !vrange_find_selector(r, uvolt, &sel);
> + if (found) {
> + unsigned int tmp;
> +
> + /*
> + * We require exactly the requested value to be
> + * supported - this can be changed later if needed
> + */
> + found = !vrange_find_value(r, sel, &tmp);
> + if (found && tmp == uvolt)
> + break;
> + found = 0;
> + }
> + }
> +
> + if (!found)
> + return -EINVAL;
> +
> + return pmic_clrsetbits(dev->parent, plat->volt_reg,
> + plat->volt_mask, sel);
> +}
> +
> +static int pca9450_regulator_probe(struct udevice *dev)
> +{
> + struct pca9450_plat *plat = dev_get_plat(dev);
> + int i, type;
> +
> + type = dev_get_driver_data(dev_get_parent(dev));
> +
> + if (type != NXP_CHIP_TYPE_PCA9450A && type != NXP_CHIP_TYPE_PCA9450BC) {
> + debug("Unknown PMIC type\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(pca9450_reg_data); i++) {
> + if (strcmp(dev->name, pca9450_reg_data[i].name))
> + continue;
> +
> + /* PCA9450B/PCA9450C uses BUCK1 and BUCK3 in dual-phase */
> + if (type == NXP_CHIP_TYPE_PCA9450BC &&
> + !strcmp(pca9450_reg_data[i].name, "BUCK3")) {
> + continue;
> + }
> +
> + *plat = pca9450_reg_data[i];
> +
> + return 0;
> + }
> +
> + pr_err("Unknown regulator '%s'\n", dev->name);
> +
> + return -ENOENT;
> +}
> +
> +static const struct dm_regulator_ops pca9450_regulator_ops = {
> + .get_value = pca9450_get_value,
> + .set_value = pca9450_set_value,
> + .get_enable = pca9450_get_enable,
> + .set_enable = pca9450_set_enable,
> +};
> +
> +U_BOOT_DRIVER(pca9450_regulator) = {
> + .name = PCA9450_REGULATOR_DRIVER,
> + .id = UCLASS_REGULATOR,
> + .ops = &pca9450_regulator_ops,
> + .probe = pca9450_regulator_probe,
> + .plat_auto = sizeof(struct pca9450_plat),
> +};
> diff --git a/include/power/pca9450.h b/include/power/pca9450.h
> index 27703bb1f91..b714fc3477d 100644
> --- a/include/power/pca9450.h
> +++ b/include/power/pca9450.h
> @@ -56,4 +56,15 @@ enum {
>
> int power_pca9450_init(unsigned char bus, unsigned char addr);
>
> +enum {
> + NXP_CHIP_TYPE_PCA9450A = 0,
> + NXP_CHIP_TYPE_PCA9450BC,
> + NXP_CHIP_TYPE_AMOUNT
> +};
> +
> +#define DVS_BUCK_RUN_MASK 0x7f
> +#define PCA9450_LDO12_MASK 0x07
> +#define PCA9450_LDO34_MASK 0x1f
> +#define PCA9450_LDO5_MASK 0x0f
> +
> #endif
> --
> 2.35.1
>
--
Heiko
More information about the U-Boot
mailing list