[PATCH v4 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL

Martyn Welch martyn.welch at collabora.com
Tue Oct 4 13:07:49 CEST 2022


The support added later in this series tweaks the PMIC voltages in the
SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
cleanly.

Signed-off-by: Martyn Welch <martyn.welch at collabora.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
 - New patch (replaces addition of legacy support for rn5t567)

Changes in v4:
 - None

 drivers/power/pmic/Kconfig  | 8 ++++++++
 drivers/power/pmic/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 66b16b06e0..8e10ecae2e 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -300,6 +300,14 @@ config PMIC_RN5T567
 	regulators Real-Time Clock and 4 GPIOs. This driver provides
 	register access only.
 
+config SPL_PMIC_RN5T567
+	bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
+	depends on SPL_DM_PMIC
+	---help---
+	The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
+	regulators Real-Time Clock and 4 GPIOs. This driver provides
+	register access only.
+
 config PMIC_TPS65090
 	bool "Enable driver for Texas Instruments TPS65090 PMIC"
 	---help---
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f73b326255..ae34e6b33e 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
 obj-$(CONFIG_PMIC_MAX8997) += max8997.o
 obj-$(CONFIG_PMIC_PM8916) += pm8916.o
 obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
-obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
+obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
 obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
 obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
 obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
-- 
2.35.1



More information about the U-Boot mailing list