[PATCH v2] mx6cuboxi: Do not print devicetree model

Fabio Estevam festevam at gmail.com
Sat Mar 30 22:03:31 CET 2024


The mx6cuboxi_defconfig target supports several board
variants. All of these variants use the hummingboard devicetree in U-Boot.

Currently, the devicetree model as well as the board variant name
are shown:

...
Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
Board: MX6 Cubox-i
...

Printing the devicetree model that is used internally by U-Boot
may confuse users.

Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the
board name is printed in board_late_init() instead.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
Changes since v1:
- Remove checkboard and print the board name in board_late_init().

 board/solidrun/mx6cuboxi/mx6cuboxi.c | 40 ++++++----------------------
 configs/mx6cuboxi_defconfig          |  1 +
 2 files changed, 9 insertions(+), 32 deletions(-)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 8edabf4404c2..31d30cfbbd7b 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -381,37 +381,6 @@ static bool has_emmc(void)
 	return (mmc_get_op_cond(mmc, true) < 0) ? 0 : 1;
 }
 
-/* Override the default implementation, DT model is not accurate */
-int checkboard(void)
-{
-	request_detect_gpios();
-
-	switch (board_type()) {
-	case CUBOXI:
-		puts("Board: MX6 Cubox-i");
-		break;
-	case HUMMINGBOARD:
-		puts("Board: MX6 HummingBoard");
-		break;
-	case HUMMINGBOARD2:
-		puts("Board: MX6 HummingBoard2");
-		break;
-	case UNKNOWN:
-	default:
-		puts("Board: Unknown\n");
-		goto out;
-	}
-
-	if (is_rev_15_som())
-		puts(" (som rev 1.5)\n");
-	else
-		puts("\n");
-
-	free_detect_gpios();
-out:
-	return 0;
-}
-
 static int find_ethernet_phy(void)
 {
 	struct mii_dev *bus = NULL;
@@ -505,12 +474,15 @@ int board_late_init(void)
 	switch (board_type()) {
 	case CUBOXI:
 		env_set("board_name", "CUBOXI");
+		puts("Board: MX6 Cubox-i");
 		break;
 	case HUMMINGBOARD:
 		env_set("board_name", "HUMMINGBOARD");
+		puts("Board: MX6 HummingBoard");
 		break;
 	case HUMMINGBOARD2:
 		env_set("board_name", "HUMMINGBOARD2");
+		puts("Board: MX6 HummingBoard2");
 		break;
 	case UNKNOWN:
 	default:
@@ -522,8 +494,12 @@ int board_late_init(void)
 	else
 		env_set("board_rev", "MX6DL");
 
-	if (is_rev_15_som())
+	if (is_rev_15_som()) {
 		env_set("som_rev", "V15");
+		puts(" (som rev 1.5)\n");
+	} else {
+		puts("\n");
+	}
 
 	if (has_emmc())
 		env_set("has_emmc", "yes");
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index 27ceb22599a6..e3aba715aa58 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -28,6 +28,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
 CONFIG_SYS_PBSIZE=532
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_FS_EXT4=y
-- 
2.34.1



More information about the U-Boot mailing list