<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=gb2312">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi Kyle,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>First of all, thank you for your work porting
u-boot(ppcboot,armboot) on intel lubbock board.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I am used to booting lubbock and linux kernel
with redboot before thinking of the fitted bootloader for a customed
board, and now I have to discard redboot because of its complexity,
and then I found armboot is a good choice.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I have followed the instructions mentioned in readme, denx
ppcboot introductoin, and armboot(also u-boot) mail list to build and run
armboot configured for lubbock. It made me easy that the building process is
fine, but after downloading the armboot.bin into lubbock flash memory at address
of 0x00000000(boot rom block0) with jtag, the confused problem appeared
that the serial console get nothing.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Trying to find the cause of the problem, I downloaded the
armboot image to lubbock application flash locating 0x04000000,
replaced the serial console emluator minicom with cu and kermit,
and also tried the u-boot-0.2.0, but nothing to display in serial
console yet!</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Is there any special attentions on serial console
working? Any suggestions are appreciated!</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>With my best regards.</FONT> </DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Shengchao</FONT></DIV></BODY></HTML>