<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial color=#000080 size=2>first time user trying to run clone
variation of the walnut bd. IBM demo board flash binary image (using PROM
burner) runs (although having LAN problems to be debugged), and talks to the
serial console ok.</FONT></DIV>
<DIV><FONT face=Arial color=#000080 size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000080 size=2>when trying to build the IBM provided
source and makefile for this target, does not work (at least does not talk to
console). already found one needed correction to the makefile.mak file
.... the hbranch utility specified a wrong size flash (0x20000) instead of
0x80000 (512kB flash both on walnut demo and my clone).</FONT></DIV>
<DIV><FONT face=Arial color=#000080 size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000080 size=2>seeking information of other
makefile.mak problems which may need correcting.</FONT></DIV>
<DIV><FONT face=Arial color=#000080 size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000080 size=2>it seems that the reset_entry block
is being loaded at 0x2020 instead of 0x62020 (near the top of the
flash).</FONT></DIV>
<DIV><FONT face=Arial color=#000080 size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000080 size=2>are there other alternative boot
source/build tools available to get my board working?</FONT></DIV>
<DIV><FONT face=Arial color=#000080 size=2></FONT> </DIV>
<DIV><BR><FONT face=Arial color=#000080 size=2>Iser Flaum<BR>(562) 926-6727
x113<BR></FONT><A href="mailto:iser@corelis.com"><FONT face=Arial color=#000080
size=2>iser@corelis.com</FONT></A></DIV></BODY></HTML>