<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1170" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT face=Arial size=2><FONT size=2>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>Hello
everyone</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>just bought the
TQM8260-AG board (and STK82XX.100 starterkit). I have been trying
to execute U-Boot-0.4.0 without any luck. It seems to get stuck during
power up, i.e. no characters on the SMC ports (checked both to be sure). I have
also tried to test the SMCTX/SMCRX pins with an oscilloscope - there is
no activity.</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>I started out
with ppcboot-2.0.0 and experienced the same problem. With ppcboot however I
was able to use a Lauterbach debugger</FONT> <FONT face=Arial
size=2>in order to try and trace the problem. It seems that ppcboot enters an
endless loop just after entering cpu_init_f during powerup. As far as I can
figure out using the Lauterbach débugger (which I am absolutely no expert at)
the loop has something to do with either an DebugException
or ppcstring.o.</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>I am using Red Hat
9.0, ELDK 2.0.0 and are compiling using the following syntax (taken from the
Denx TQM8xxL guide as there is no guide available for the TQM8260
board):</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>make
distclean</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>make
TQM8260_300MHz_config</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>make
all</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>I download the
resulting srec file using</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>protect
1234</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>erase 40000000
4001ffff</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>load 0
f</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>..and then sends the
srec file</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><FONT face=Arial><FONT size=2><SPAN class=108381319-27062003>Mt TQM8260
board is the TQM8260-AG.204 board from TQM.</SPAN> <SPAN
class=108381319-27062003>Has anyone got this board to work with Denx
Linux??</SPAN></FONT></FONT></DIV>
<DIV><FONT face=Arial><FONT size=2><SPAN
class=108381319-27062003></SPAN></FONT></FONT> </DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>Any help would be
appreciated </FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003></SPAN> </DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial
size=2>Thanks</FONT></SPAN></DIV>
<DIV><SPAN class=108381319-27062003><FONT face=Arial size=2>Kim
Engedahl</FONT></SPAN></DIV></FONT></FONT></DIV></BODY></HTML>