<HTML>
<BODY>
<BR>Please, check u-boot monitor messages below...
<BR>I changed bd_t data structure from u-boot to linux kernel....
<BR>("Real time clock seems suck" and hangs resolved by doing this.)
<BR>
<BR>in bdinfo command and linux boot message, ethaddr of target board seems set wrong...
<BR>
<BR>please give a comments to solve the problem...
<BR>
<BR>
<BR>===========================================
<BR>U-Boot 0.4.0 (Sep 8 2003 - 13:29:36)
<BR> &!
nbsp;
<BR>CPU: IBM PowerPC 405GP Rev. D at 200 MHz (PLB=100, OPB=50, EBC=50 MHz)
<BR> PCI sync clock at 33 MHz, internal PCI arbiter enabled
<BR> 16 kB I-Cache 8 kB D-Cache
<BR>Board: ### No HW ID - assuming WALNUT405
<BR>I2C: ready
<BR>DRAM: 32 MB
<BR>FLASH: 512 kB
<BR>In: serial
<BR>Out: serial
<BR>Err: serial
<BR>KGDB: kgdb ready
<BR>ready
<BR>BEDBUG:ready
<BR>Hit any key to stop autoboot: 0
<BR>=> bdinfo
<BR>memstart = 0x00000000
<BR>memsize = 0x02000000
<BR>flashstart = 0xFFF80000
<BR>flashsize = 0x00080000
<BR>flashoffset = 0x0002B700
<BR>sramstart = 0x00000000
<BR>sramsize = 0x00000000
<BR>bootflags = 0x0000A000
<BR>procfreq = 200 MHz
<BR>plb_busfreq = 100 MHz
<BR>pci_busfreq = 33.333 MHz
<BR>ethaddr = 24:00:00:00:00:00
<BR>IP addr = 192.168.1.200
<BR>baudrate = 9600 bps
<BR>=> printenv ethaddr
<BR>ethaddr=0x0004ace31224
<BR>=> tftpboot 100000 /tftpboot/vmlinux.u-boot
<BR>ENET Speed is 100 Mbps - FULL duplex connection
<BR>TFTP from server 192.168.1.210; our IP address is 192.168.1.200
<BR>Filename '/tftpboot/vmlinux.u-boot'.
<BR>Load address: 0x100000
<BR>Loading: #################################################################
<BR> #################################################
<BR>done
<BR>Bytes transferred = 581935 (8e12f hex)
<BR>=> bootm 100000
<BR>## Booting image at 00100000 ...
<BR> Image Name: Kernel(PK2.0 mod for u-boot)
<BR> Created: 2003-09-10 8:01:10 UTC
<BR> Image Type: PowerPC Linux Kernel Image (gzip compressed)
<BR> Data Size: 581871 Bytes = 568.2 kB
<BR> Load Address: 00000000
<BR> Entry Point: 00000000
<BR> Verifying Checksum ... OK
<BR> Uncompressing Kernel Image ... OK
<BR>Linux version 2.4.18_mvl30-walnut (root@hwjang) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 2003. 09. 10. (수) 16:58:02 KST
<BR>IBM Walnut (IBM405GP) Platform
<BR>Port by MontaVista Software, Inc. (source@mvista.com)
<BR>On node 0 totalpages: 8192
<BR>zone(0): 8192 pages.
<BR>zone(1): 0 pages.
<BR>zone(2): 0 pages.
<BR>Kernel command line: root=/dev/nfs rw nfsroot=192.168.1.210:/root/Work/src/ramdisk/rootfs_hhl ip=192.168.1.200:192.168.1.210:192.168.1.1:255.255.255.0:hwjang:eth0:off
<BR>Calibrating delay loop... 199.88 BogoMIPS
<BR>Memory: 30692k available (1032k kernel code, 400k data, 72k init, 0k highmem)
<BR>Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
<BR>Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
<BR>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<BR>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<BR>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<BR>POSIX conformance testing by UNIFIX
<BR>PCI: Probing PCI hardware
<BR>Linux NET4.0 for Linux 2.4
<BR>Based upon Swansea University Computer Society NET3.039
<BR>Initializing RT netlink socket
<BR>OCP uart ver 1.2 init complete
<BR>Starting kswapd
<BR>Disabling the Out Of Memory Killer
<BR>i2c-core.o: i2c core module version 2.6.2 (20011118)
<BR>initialize_kbd: Keyboard reset failed, no ACK
<BR>Detected PS/2 Mouse Port.
<BR>pty: 256 Unix98 ptys configured
<BR>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<BR>ttyS00 at 0xef600300 (irq = 0) is a 16550A
<BR>ttyS01 at 0xef600400 (irq = 1) is a 16550A
<BR>block: 64 slots per queue, batch=16
<BR>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<BR>loop: loaded (max 8 devices)
<BR>eth0: Phy @ 0x1, type DP83843 (0x20005c10)
<BR>Reset ethernet interfaces
<BR>NET4: Linux TCP/IP 1.0 for NET4.0
<BR>IP Protocols: ICMP, UDP, TCP, IGMP
<BR>IP: routing cache hash table of 512 buckets, 4Kbytes
<BR>TCP: Hash tables configured (established 2048 bind 2048)
<BR>opening eth0 on emac 0
<BR>eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
<BR>eth0: IBM EMAC: MAC 24:00:00:00:00:00.
<BR>eth0: IBM EMAC: open completed
<BR>IP-Config: Gateway not on directly connected network.
<BR>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<BR>Looking up port of RPC 100003/2 on 192.168.1.210
<BR>RPC: sendmsg returned error 101
<BR>portmap: RPC call returned error 101
<BR>Root-NFS: Unable to get nfsd port number from server, using default
<BR>Looking up port of RPC 100005/1 on 192.168.1.210
<BR>RPC: sendmsg returned error 101
<BR>portmap: RPC call returned error 101
<BR>Root-NFS: Unable to get mountd port number from server, using default
<BR>RPC: sendmsg returned error 101
<BR>mount: RPC call returned error 101
<BR>Root-NFS: Server returned error -101 while mounting /root/Work/src/ramdisk/rootfs_hhl
<BR>VFS: Unable to mount root fs via NFS, trying floppy.
<BR>request_module[block-major-2]: Root fs not mounted
<BR>VFS: Cannot open root device "nfs" or 02:00
<BR>Please append a correct "root=" boot option
<BR>Kernel panic: VFS: Unable to mount root fs on 02:00
<BR> <0>Rebooting in 180 seconds..
<BR>==========================================
<BR></BODY>
</HTML>
<BR>
<a HREF="http://www.dreamwiz.com/" TARGET=_blank><img SRC="http://mail.dreamwiz.com/jazz0719/cgi-bin/receive_check.cgi?mailbox=Sent&uid_validity=00000000000961517366&uid=00000000000000000361,X00000&key=c30ca5dd10eab21687b6efd9df7b7f6f" WIDTH=108 HEIGHT=21 BORDER="0"></a><span style="font-size: 9pt; font-family:굴림; color: #494949; text-decoration: none;">생활인터넷 드림위즈 http://www.dreamwiz.com</span><br><img src="http://i.dreamwiz.com/dw/ko/mw/mail/def/n.gif" width=1 height=5 border="0"><br>
<img src="http://i.dreamwiz.com/dw/ko/n.gif" width=5 height=1 border="0"><img src="http://i.dreamwiz.com/dw/ko/280014_2.gif" width=25 height=25 align="absmiddle" border="0" >
<a href="http://life.dreamwiz.com/"><span style="font-size: 9pt; font-family:굴림; color: #494949; text-decoration: none;">[생활정보] 더도덜도말고 <font color="red">한가위</font> 같아라~~. 날씬(?!)하고 알차게 보내는 방법을 알려드립니다.</font></a><br>
<img src="http://i.dreamwiz.com/dw/ko/n.gif" width=5 height=1 border="0"><img src="http://i.dreamwiz.com/dw/ko/mailj.gif" height=25 align="absmiddle" border="0" >
<a href="http://www.dreamwiz.com/ma/jr/info_jr.htm"><span style="font-size: 9pt; font-family:굴림; color: #494949; text-decoration: none;" >[쥬니어메일] 어린이에게 스팸없는 건강하고 깨끗한 메일환경을 만들어주십시오.</font></a><br>