--- u-boot-0.4.8/common/cmd_ide.c	2003-07-01 23:07:07.000000000 +0200
+++ u-boot-0.4.8_new/common/cmd_ide.c	2003-10-09 00:02:42.000000000 +0200
@@ -65,6 +65,7 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_IDE)
 
+#ifdef CONFIG_IDE_8xx_DIRECT
 /* Timings for IDE Interface
  *
  * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
@@ -101,6 +102,8 @@ static int pio_mode = CFG_PIO_MODE;
 
 #define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
 
+#endif /* CONFIG_IDE_8xx_DIRECT */
+
 /* ------------------------------------------------------------------------- */
 
 /* Current I/O Device	*/
@@ -180,8 +183,6 @@ ulong atapi_read (int device, ulong blkn
 
 #ifdef CONFIG_IDE_8xx_DIRECT
 static void set_pcmcia_timing (int pmode);
-#else
-#define set_pcmcia_timing(a)	/* dummy */
 #endif
 
 /* ------------------------------------------------------------------------- */
@@ -472,9 +473,8 @@ int do_diskboot (cmd_tbl_t *cmdtp, int f
 
 void ide_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #ifdef CONFIG_IDE_8xx_DIRECT
+	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t *immr = (immap_t *)CFG_IMMR;
 	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
 #endif
@@ -502,6 +502,7 @@ void ide_init (void)
 
 	WATCHDOG_RESET();
 
+#ifdef CONFIG_IDE_8xx_DIRECT
 	/* Initialize PIO timing tables */
 	for (i=0; i <= IDE_MAX_PIO_MODE; ++i) {
 	    pio_config_clk[i].t_setup  = PCMCIA_MK_CLKS(pio_config_ns[i].t_setup,
@@ -518,6 +519,7 @@ void ide_init (void)
 		    pio_config_ns[i].t_length, pio_config_clk[i].t_length,
 		    pio_config_ns[i].t_hold,   pio_config_clk[i].t_hold);
 	}
+#endif /* CONFIG_IDE_8xx_DIRECT */
 
 	/* Reset the IDE just to be sure.
 	 * Light LED's to show
@@ -528,12 +530,12 @@ void ide_init (void)
 #ifdef CONFIG_IDE_8xx_DIRECT
 	/* PCMCIA / IDE initialization for common mem space */
 	pcmp->pcmc_pgcrb = 0;
-#endif
 
 	/* start in PIO mode 0 - most relaxed timings */
 	pio_mode = 0;
 	set_pcmcia_timing (pio_mode);
 
+#endif
 	/*
 	 * Wait for IDE to get ready.
 	 * According to spec, this can take up to 31 seconds!