<P>hello everyone!</P>
<P> As described in u-boot readme file, to run hello_world example we have to write "loads", but this command doesnt seem to work with me and give the following msg</P>
<P> <FONT color=#bf005f>Unknown command 'loads' - try 'help'</FONT></P>
<P>and when i give the command go 40004 Hello World! This is a test.</P>
<P>following error msg appears</P>
<P><FONT color=#bf005f>## Starting application at 0x00040004 ...<BR>Bus Fault @ 0x00000700, fixup 0x00000000<BR>Machine check in kernel mode.<BR>Caused by (from msr): regs 03bc3190 Unknown values in msr<BR>NIP: 00000700 XER: 00000000 LR: 03FCE234 REGS: 03bc3190 TRAP: 0200 DAR: 03BC3268<BR>MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00</FONT></P>
<P><FONT color=#bf005f>GPR00: 03FCE224 03BC3280 8C03115E 00000002 03BC3674 00000010 FFFFFFFE 00000004<BR>GPR08: 00000041 FFF00208 00000000 FFF00211 00000030 00002002 03FF3000 C3FC4000<BR>GPR16: 40022049 20224A10 03402C44 0000D00C 00003002 00000001 00000000 00000001<BR>GPR24: 00000000 03BC3670 00000000 03BC3674 00040004 03BC3760 03FF35B0 00000002<BR>Call backtrace:<BR>machine check</FONT></P>
<P><BR><FONT color=#bf005f>U-Boot 1.1.2 Version: 120/240804</FONT></P>
<P><FONT color=#bf005f>MPC8250 Reset Status: Check Stop, External Soft, External Hard</FONT></P>
<P><FONT color=#bf005f>MPC8250 Clock Configuration<BR> - Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq 30-85 , Core Freq 100-300<BR> - dfbrg 1, corecnf 0x1e, busdf 4, cpmdf 1, plldf 1, pllmf 4<BR> - vco_out 333333330, scc_clk 83333332, brg_clk 20833333<BR> - cpu_clk 233333331, cpm_clk 166666665, bus_clk 66666666</FONT></P>
<P><FONT color=#bf005f>CPU: MPC8250 (HiP4 Rev 14, Mask B.1 4K25A) at 233.333 MHz<BR>Board: Marconi PUC<BR>I2C: ready<BR>DRAM: 64 MB<BR>FLASH: 8 MB<BR>Regular MDIO/MDC layout<BR>Net: FCC1 ETHERNET, FCC3 ETHERNET<BR>Enabled autonegotiation for PHY at addr 0<BR>Enabled autonegotiation for PHY at addr 1<BR>Hit any key to stop autoboot: 0<BR>"U-Boot"</FONT></P>
<P>Please help me in this regard, as it migth be a minor error which i am unable to encounter. I am stuck at this point and cant start to write my own standalone applications.</P>
<P>Thanks in advance</P>
<P>Kind Regards</P>
<P>Chishti</P><p>__________________________________________________<br>Do You Yahoo!?<br>Tired of spam? Yahoo! Mail has the best spam protection around <br>http://mail.yahoo.com