<P>
 &amp;nbsp;<BR>
 &amp;nbsp;<BR>
Dear everyone,<BR>
<BR>
I compiled U-Boot for my SMDK2410 Board(made by Samsung),<BR>
$ make smdk2410_config<BR>
$ make all<BR>
Then , I wrote u-boot.bin to flash(SMDK2410:K9S1208 64MB).<BR>
I used kermit£¨115200£¬8IN1,No,No) , but I cannot get any response from serial port at my terminal. But when I used vivi as bootloader before , and use command 'kermit -c', then I get information at console. That is why ?<BR>
Any suggestions is welcome , thanks !<BR>
<BR>
Dear Wolfgang Denk , thank you for your advice and I use ELDK to compile U-Boot ,and it works well ! But I beg your pardon that you told me not to post HTML to this mailing list but it seems I cannot stop it . I sent a mail to my friend and he told me that there was no any HTML in my mail . I don't know why there are those codes in my mail when I sent mails to this list . Maybe they are added by my mail-box service provider .<BR>
Anyway , I hope you can forgive me ! And I really appreciate what you have done for me .<BR>
<BR>
Best Wishes,<BR>
Kenton Lau<BR>
<BR>

</P>
<br><br>
<A target="_blank" HREF="http://clients.rediff.com/signature/track_sig.asp"><IMG SRC="http://ads.rediff.com/RealMedia/ads/adstream_nx.cgi/www.rediffmail.com/inbox.htm@Bottom" BORDER=0 VSPACE=0 HSPACE=0></a>