<br><font size=2 face="sans-serif">hi all,</font>
<br>
<br><font size=2 face="sans-serif">I create a mtdblock partition from linux
on mtdblock0</font>
<br>
<br><font size=2 face="sans-serif">I flash partition with this procedure
:</font>
<br><font size=2 face="sans-serif">#linux</font>
<br><font size=2 face="sans-serif">> flash_eraseall /dev/mtdchar0</font>
<br><font size=2 face="sans-serif">> nandwrite /dev/mtdchar0 jffs2.img</font>
<br><font size=2 face="sans-serif">> mount -t jffs2 /dev/mtdblock0 /mnt/mtd</font>
<br><font size=2 face="sans-serif">> cd /mnt/mtd</font>
<br><font size=2 face="sans-serif">> ls</font>
<br><font size=2 face="sans-serif">> toto
/opt</font>
<br><font size=2 face="sans-serif">> umount /mnt/mtd</font>
<br><font size=2 face="sans-serif">> reboot</font>
<br>
<br><font size=2 face="sans-serif">the partition jffs2 running correctly
under linux but when I try this in u-boot, there are problem</font>
<br><font size=2 face="sans-serif">#u-boot</font>
<br><font size=2 face="sans-serif">>ls</font>
<br><font size=2 face="sans-serif">warnig block writes should be last 20487
bytes and start on a 2048 byte boundry...</font>
<br>
<br><font size=2 face="sans-serif">If you have a suggest about this problem
?</font>
<br><font size=2 face="sans-serif">Maybe must be set partition offset and
size partition ?</font>
<br>
<br><font size=2 face="sans-serif">thanks for your answer ... and your
help ...</font>
<br>
<br><font size=2 face="sans-serif"><br>
With kind regards/ Cordialement, <br>
<br>
David Flament<br>
SySol9100 System Integration Engineer<br>
---------------------------------------------------------------------------------------------------------<br>
Philips Semiconductors - BL Cellular Systems - MST System Solutions<br>
Route d'Angers <br>
72081 Le Mans Cedex 9<br>
France<br>
Phone :+33 (0) 2 19 18 43 11<br>
Mobile : +33 (0)6 23 05 12 18<br>
mail : flament.assystem@philips.com</font>