; bdiGDB configuration file for EP852 board
; -----------------------------------------
;
[INIT]
; init core register
WREG        MSR        0x00001002   ; MSR  : ME,RI
WSPR         27        0x00001002   ; SRR1 : ME,RI
WSPR        149        0x0002000E   ; DER  : enable SYSIE for BDI flash progr.
WSPR        638        0xFFF00000   ; IMMR : internal memory at 0xFFF00000
WSPR        158        0x00000007   ; ICTRL:
 
; init SIU register
WM32        0xFFF00000 0x00610400   ; SIUMCR
WM32        0xFFF00004 0xFFFFFF89   ; SYPCR
 
WSPR        796        0x00000000   ; M_TWB: invalidate TWB

; Init BR0/OR0 to make sure FLASH isn't covering the whole area
;WM32        0xFFF00104 0xFC000140   ; 64MB
;WM32        0xFFF00100 0x00000001   ; Flash at 0x0000000
; BSCR 
;WM32        0xFFF0011C 0xFFFF8970   ; 
;WM32        0xFFF00118 0xFA400001   ; BSCR at 0xFA400000
;WM8         0xFA400000 0xAD         ; BSCR[0]. Enable Eth & SMC Xceivers
;WM8         0xFA400002 0xC0         ; BSCR[2]. Enable and power up MII Xceiver

[TARGET]
MMU         XLAT        ; support virtual addresses (for Linux!)
PTBASE      0x000000F0  ; ptr to page table pointers
CPUCLOCK    50000000    ; the CPU clock rate after processing the init list
BDIMODE     AGENT       ; the BDI working mode (LOADONLY | AGENT)
BREAKMODE   HARD        ; SOFT or HARD, HARD uses PPC hardware breakpoints

[HOST]
IP          192.168.1.254
FILE        u-boot.bin.ep852
FORMAT      BIN
LOAD        MANUAL      ;load code MANUAL or AUTO after reset
DEBUGPORT   2001
START       0x0100

[FLASH]
CHIPTYPE    MIRRORX16	;; Am29LV
CHIPSIZE    0x800000    ;;       640ML
BUSWIDTH    32		;;             (x2)
WORKSPACE   0xFFF02000

FILE        u-boot.bin.ep852        ;The file to program
FORMAT      BIN  0x00000000
ERASE       0x00000000 BLOCK
ERASE       0x00020000 BLOCK


[REGS]
DMM1    0xFFF00000
FILE    bdi2000/defs/reg860.def