<br><font size=2 face="sans-serif">Hi all,</font>
<br><font size=2 face="sans-serif">I was able to build u-boot for my custom
board. when i tried to load it nothing is coming. I am using TRACE32 ICE
and the board is almost similar to MPC8260ADS. I had set the baudrate as
115200 and flowcontrol as none. when i give run command in TRACE32, nothing
is coming in hyperterminal.</font>
<br><font size=2 face="sans-serif">My flash base is 0x0000 0000 so i had
given this in the board/mpc8260ads/config.mk . I have done some changes
in the include/configs/MPC8260ADS.h </font>
<br><font size=2 face="sans-serif">for my board.</font>
<br><font size=2 face="sans-serif">Any help is appreciated.</font>
<br><font size=2 face="sans-serif">Thanks in advance.</font>
<br>
<br><font size=2 face="sans-serif"><br>
Prabha J.<br>
Tata Consultancy Services Limited<br>
Mailto: prabha.j@tcs.com<br>
Website: http://www.tcs.com</font>
<table><tr><td bgcolor=#ffffff><font color=#000000>Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you<br>
</font></td></tr></table>