<br><font size=2 face="sans-serif">Hi all,</font>
<br><font size=2 face="sans-serif">I had created myboard directory in the
board directory and copied all files from the board/mpc8260ads into myboard
directory and did some changes in the config file ie include/configs/myboard.h
file. And in Makefile and MAKEALL file i included my board details.</font>
<br>
<br><font size=2 face="sans-serif">Since my SDRAM physical address starts
from 0x300000000 i had set it CFG_SDRAM_BASE as 30000000. and CFG_FLASH_BASE
as 0x00000000 as my flash base address. But in README i had seen RAM's
physical address should be 0. what i have done is correct or not.
I am attaching my address map for the board Please give me some idea.</font>
<br><font size=2 face="sans-serif">when i give mybord_config it is configured
.</font>
<br>
<br><font size=2 face="sans-serif">when i try to compile it its giving
error as </font>
<br>
<br><font size=2 face="sans-serif">make[1]: Leaving directory `/home/batsayan/u-boot-1.1.2/lib_generic'</font>
<br><font size=2 face="sans-serif">make -C `dirname board/tcs8260ads/libtcs8260ads.a`</font>
<br><font size=2 face="sans-serif">make[1]: Entering directory `/home/batsayan/u-boot-1.1.2/board/tcs8260ads'</font>
<br><font size=2 face="sans-serif">make[1]: *** No rule to make target
`tcs8260ads.c', needed by `.depend'. Stop.</font>
<br><font size=2 face="sans-serif">make[1]: Leaving directory `/home/batsayan/u-boot-1.1.2/board/tcs8260ads'</font>
<br><font size=2 face="sans-serif">make: *** [board/tcs8260ads/libtcs8260ads.a]
Error 2</font>
<br>
<br><font size=2 face="sans-serif">Thanks in advance.</font>
<br>
<br><font size=2 face="sans-serif"><br>
Prabha J.<br>
Tata Consultancy Services Limited<br>
Mailto: prabha.j@tcs.com<br>
Website: http://www.tcs.com</font>
<table><tr><td bgcolor=#ffffff><font color=#000000>Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you<br>
</font></td></tr></table>