<br><font size=2 face="sans-serif">Hello,</font>
<br>
<br><font size=2 face="sans-serif">We are able to build ROM u-boot for
MPC8260 based customs board. We have observed a strange behavior
of the board. When we power it up at the beginning of the day; it resets
and resets. After a couple of power on/off we get the boot prompt. I
am giving the log what we get after we power it up for the first time.
Any help will be appreciated.</font>
<br>
<br><font size=2 face="sans-serif">*****LOG********************</font>
<br>
<br><font size=2 face="sans-serif">U-Boot 1.1.2 (Jan 5 2006 - 15:01:10)</font>
<br>
<br><font size=2 face="sans-serif">MPC8260 Reset Status: External Soft,
External Hard</font>
<br>
<br><font size=2 face="sans-serif">MPC8260 Clock Configuration</font>
<br><font size=2 face="sans-serif"> - Bus-to-Core Mult 3x, VCO Div
2, 60x Bus Freq 33-100, Core Freq 100-300</font>
<br><font size=2 face="sans-serif"> - dfbrg 1, corecnf 0x08, busdf
3, cpmdf 1, plldf 0, pllmf 1</font>
<br><font size=2 face="sans-serif"> - vco_out 248000000, scc_clk
62000000, brg_clk 15500000</font>
<br><font size=2 face="sans-serif"> - cpu_clk 186000000, cpm_clk
124000000, bus_clk 62000000</font>
<br>
<br><font size=2 face="sans-serif">CPU: MPC8260 (HiP4 Rev 14, Mask
B.1 4K25A) at 186 MHz</font>
<br><font size=2 face="sans-serif">Board: Motorola MPC8260ADS</font>
<br><font size=2 face="sans-serif">DRAM: 256 MB</font>
<br><font size=2 face="sans-serif">Top of RAM usable for U-Boot at: 10000000</font>
<br><font size=2 face="sans-serif">Reserving 221k for U-Boot at: 0ffc8000</font>
<br><font size=2 face="sans-serif">Reserving 4352k for malloc() at: 0fb88000</font>
<br><font size=2 face="sans-serif">Reserving 76 Bytes for Board Info at:
0fb87fb4</font>
<br><font size=2 face="sans-serif">Reserving 72 Bytes for Global Data at:
0fb87f6c</font>
<br><font size=2 face="sans-serif">Stack Pointer at: 0fb87f48</font>
<br><font size=2 face="sans-serif">New Stack Pointer is: 0fb87f48</font>
<br><font size=2 face="sans-serif">Now running in RAM - U-Boot at: 0ffc8000</font>
<br><font size=2 face="sans-serif">FLASH: Address at 0th 8 and 1st
8 b4 </font>
<br><font size=2 face="sans-serif"> Address at 0th 8 and 1st 8 a4
</font>
<br><font size=2 face="sans-serif"> Address at 0th 8 and 1st 8 a4
vals </font>
<br><font size=2 face="sans-serif">### Unknown flash ID 00000008 00000008
at address FE000000 ###</font>
<br><font size=2 face="sans-serif">0 th flash size = 524288 bytes1 th flash
size = 524288 bytesflash_protect ON: from 0xFE000000 to 0xFE031FFF</font>
<br><font size=2 face="sans-serif">flash_protect ON: from 0xFE040000 to
0xFE07FFFF</font>
<br><font size=2 face="sans-serif"> 1 MBTesting Flash Size</font>
<br><font size=2 face="sans-serif">Flash Start fe000000</font>
<br><font size=2 face="sans-serif">Flash Size 100000</font>
<br><font size=2 face="sans-serif">Flash Offset 2 32000</font>
<br><font size=2 face="sans-serif">CPU INIT</font>
<br>
<br><font size=2 face="sans-serif">U-Boot 1.1.2 (Jan 5 2006 - 15:01:10)</font>
<br>
<br><font size=2 face="sans-serif">**************LOG*********************</font>
<br>
<br><font size=2 face="sans-serif">Thanks,<br>
Batsayan Das<br>
</font>
<table><tr><td bgcolor=#ffffff><font color=#000000>Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you<br>
</font></td></tr></table>