<br><font size=2 face="sans-serif">Hello</font>
<br>
<br><font size=2 face="sans-serif">I am facing a problem with u-boot update
on my OMAP P2 730 target. Are there any build-time configruation options
for u-boot build related to the target's NAND or NOR flash. In other words,
do we need to specify any build-time configuration options if we intend
to burn the resulting u-boot binary to NAND or NOR flash.</font>
<br>
<br><font size=2 face="sans-serif">I have U-boot 1.0.1 burnt to OMAP 730
P2 NOR flash. I am now trying to update u-boot using the method:</font>
<br>
<br><font size=2 face="sans-serif">- Download u-boot.bin (new version)
to target's RAM using serial line </font>
<br><font size=2 face="sans-serif">- Copy u-boot.bin to target's flash
using u-boot command 'cp.b'</font>
<br>
<br><font size=2 face="sans-serif">The u-boot version I am running presently
is vendor supplied (version 1.0.1) and I want to update it with the one
I have built (version 1.1.1) for my target hardware.</font>
<br>
<br><font size=2 face="sans-serif">I tried downloading the u-boot.bin to
the P2 730 RAM over serial line to a specific address and triggered the
binary's entry point using command:</font>
<br><font size=2 face="sans-serif"><i>go 'start address'</i></font>
<br>
<br><font size=2 face="sans-serif">The new u-boot binary seems to execute
as it comes up with normal u-boot start-up messages, but stops and hangs
at a point. Please have a look at the traces of execution:</font>
<br>
<br><font size=2 face="sans-serif"><i>OMAP730 P2 # loadb 11080000</i></font>
<br><font size=2 face="sans-serif"><i>## Ready for binary (kermit) download
to 0x11080000 at 115200 bps...</i></font>
<br><font size=2 face="sans-serif"><i>## Total Size &nbsp; &nbsp; &nbsp;=
0x0001ca68 = 117352 Bytes</i></font>
<br><font size=2 face="sans-serif"><i>## Start Addr &nbsp; &nbsp; &nbsp;=
0x11080000</i></font>
<br><font size=2 face="sans-serif"><i>OMAP730 P2 # go 11080000</i></font>
<br><font size=2 face="sans-serif"><i>## Starting application at 0x11080000
...</i></font>
<br>
<br>
<br><font size=2 face="sans-serif"><i>U-Boot 1.1.1 (Apr 19 2006 - 15:50:59)</i></font>
<br>
<br><font size=2 face="sans-serif"><i>U-Boot code: 11080000 -&gt; 1109CA68
&nbsp;BSS: -&gt; 110A134C</i></font>
<br><font size=2 face="sans-serif"><i>RAM Configuration:</i></font>
<br><font size=2 face="sans-serif"><i>Bank #0: 10000000 32 MB</i></font>
<br><font size=2 face="sans-serif"><i>Flash: &nbsp;0 kB</i></font>
<br><font size=2 face="sans-serif"><i>NAND: &nbsp; &nbsp; &nbsp; &nbsp;
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; </i>&nbsp;---------&gt;
The execution hangs at this point</font>
<br>
<br>
<br><font size=2 face="sans-serif">I am not very sure what is expected
by u-boot binary at his point. The above binary is result of a custom build
done by me. The u-boot sources were downloaded from http://linux.omap.com
and the build time configuration was done using 'make omap730p2_config'.</font>
<br>
<br><font size=2 face="sans-serif">Do I need to take care of any other
build-time options/configurations?</font>
<br>
<br><font size=2 face="sans-serif">Kindly help if you have any ideas/answers.</font>
<br>
<br><font size=2 face="sans-serif">Your suggestion on how to update u-boot
are also welcome.</font>
<br>
<br><font size=2 face="sans-serif">Thanks</font>
<br>
<br><font size=2 face="sans-serif">Chetan<br>
<br>
*********************** &nbsp;FSS-Unclassified &nbsp; ***********************</font>