Hi all,<br> I am successfully able to configure the u-boot for phytec board (for ARM7TDMI). I am getting the u-boot prompt. <br> But the problem is i am not able to trnasfer the image at specified address in RAM( which is say 0x81000000). Even u-boot is finding this address , thts not the issue.<br> I am transferring a sample application code (blink LED) at this location. As i am getting the prompt and other prints through minicom utility , serial interface is working.<br> Is there any configurable option need to set say for ymodem, kermit,xmodem,zmodem in u-boot ? so that i can transfer my application image through minicom.<br> <br> In my board_config.h file i have define : CONFIG_BAUDRATE 9600<br> but when i execute the 'bdinfo' command from the prompt i am getting baud as 0.<br> <br> Can anyone please let me know about
this.<br> <br> Thanks and Regards,<br> Kaushik<br> <br> <br> <br> <p>
<hr size=1>Love cheap thrills? Enjoy PC-to-Phone <a href="http://us.rd.yahoo.com/mail_us/taglines/postman9/*http://us.rd.yahoo.com/evt=39666/*http://messenger.yahoo.com/"> calls to 30+ countries</a> for just 2¢/min with Yahoo! Messenger with Voice.