<div>Hi Andreas/All,</div>
<div> </div>
<div> Thanks for the reply.</div>
<div> </div>
<div> I am using same baudrate for terminal as well as kermit modes. both are with 115200.</div>
<div> </div>
<div> I am getting the prompt on console over serial and able to execute commands like help, bdinfo, md and mw etc.</div>
<div> </div>
<div> I am sending a log herewith with some of the commands' execution as well as the .kermrc file that I am using.</div>
<div> </div>
<div>Any pointer would be of very much help.</div>
<div> </div>
<div>Thanks and Regards</div>
<div>Banajit</div>
<div> </div>
<div>Message: 7<br>Date: Wed, 19 Jul 2006 12:54:46 +0200<br>From: Andreas Schweigstill <<a title="mailto:andreas@schweigstill.de" onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:andreas@schweigstill.de" target="_blank">
andreas@schweigstill.de</a>><br>Subject: Re: [U-Boot-Users] Loadb issue<br>To: <a title="mailto:u-boot-users@lists.sourceforge.net" onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:u-boot-users@lists.sourceforge.net" target="_blank">
u-boot-users@lists.sourceforge.net</a><br>Message-ID: <<a title="mailto:44BE0F76.50208@schweigstill.de" onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:44BE0F76.50208@schweigstill.de" target="_blank">
44BE0F76.50208@schweigstill.de</a>><br>Content-Type: text/plain; charset=ISO-8859-1; format=flowed<br><br>Dear Banajit!<br><br>Banajit Goswami schrieb:<br> > Content-Type: text/html; charset=ISO-8859-1<br> > Content-Transfer-Encoding: 7bit
<br> > Content-Disposition: inline<br><br>Please do not post messages in HTML format to this list.<br><br>> 3) at u-boot command prompt gave following command<br>> => loadb 0x60008000 115200<br>> 4) From hyperterminal, Transfer->send file with protocol as kermit,
<br>> selected the file and tried sending, but failed. Everytime<br>> hyperterminal poped up "error limit exceeded".<br><br>Are you sure that you are using the same baudrate for terminal mode<br>and kermit mode? Do the RS232 level converters have their own supply
<br>or do they get it from the modem control lines? Although you selected<br>no handshake this doesn't neccessarily mean that the control lines<br>don't get toggled.<br><br>With best regards<br>Andreas Schweigstill<br><br>
--<br>Dipl.-Phys. Andreas Schweigstill<br>Schweigstill IT | Embedded Systems<br>Schauenburgerstra?e 116, D-24118 Kiel, Germany<br>Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436<br>Mobile: (+49) 171 6921973, Web: <a title="http://www.schweigstill.de/" onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.schweigstill.de/" target="_blank">
http://www.schweigstill.de/</a><br><br><br> </div>