HI<br> I am a newbie for boot loader, and I have some problems when update<br>u-boot 1.1.3 to u-boot 1.1.4 for OMAP2420 H4 ES 2.X Menelaus COMBO.<br><br> First, I got u-boot.bin.gz from<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="http://linux.omap.com/pub/bootloader/h4/u-boot.bin.gz" target="_blank">http://linux.omap.com/pub<wbr>/bootloader/h4/u-boot.bin.gz</a><br> gunzip it and renamed to u-boot.bin.raw.<br><br>After that, I used TI OST_Host to burn it to flash. It really work!<br>and I got the following messages:<br>******************************<div id="mb_0"><wbr><br>U-Boot 1.1.3 (Feb 27 2006 - 12:26:39)<br>U-Boot code: 80E80000 -> 80E9C658 BSS: -> 80EA1424<br>OMAP2420-GP revision 3, PRCM III<br>TI H4 SDP Base Board + Menelaus Daughter Board + mDDR<br>RAM Configuration:<br>Bank #0: 80000000 32 MB<br>Bank #1: 82000000 32 MB<br>Flash: 64 MB<br>In: serial<br>Out: serial<br>Err:
serial<br>******************************<wbr>***********<br><br>But when I build u-boot-1.1.4<br>from <a onclick="return top.js.OpenExtLink(window,event,this)" href="ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.4.tar.bz2" target="_blank">ftp://ftp.denx.de/pub/u-boot/u<wbr>-boot-1.1.4.tar.bz2</a><br>using arm-linux-gcc-4.0.2-glibc-2.3<wbr>.6<br><br>#make distclean<br>#make omap2420h4_config<br>#make all<br><br>I got error message:<br>common/env_flash.c row: 267 undefined reference to 'flash_probe'<br><br>I try to comment the line 267 and then build with no error message.<br>Also, I got u-boot.bin and rename it to u-boout.bin.raw.<br>But after buring to Flash by OST, it shows nothing at all on the terminal.<br><br>Could anyone please help me ?<br>Or could someone email to me a well-builded u-boot.raw for omap2420h4 ?<br>Best regards.</div><p> ___________________________________________________ <br> 最新版 Yahoo!奇摩即時通訊 7.0，免費網路電話任你打！ <br>
http://messenger.yahoo.com.tw/