Hi All,<br><br>my cpu --------arm926ejs<br>my board------scp (Its my baord)<br><br>u-boot working on my board.<br><br>my env varialbles<br><br>USCP# printenv<br>baudrate=115200<br>bootpaddr=11:11:11:11:11:11<br>bootargs=root=/dev/mtdblock3 rootfstype=jffs2<br>bootparams=0x1000<br>ethaddr=00:50:c0:1b:7f:02<br>ipaddr=192.168.2.127<br>serverip=192.168.2.130<br>bootcmd=bootm<br>bootdelay=5<br>loadaddr=0x8000<br>stdin=serial<br>stdout=serial<br>stderr=serial<br><br>all commands mostly working except bootm<br>I loaded kernel image at 0x8000 using tftpboot<br><br>USCP# tftpboot 0x8000 scp_zimage<br>boot port is 0<br>Using port: EthA<br>RX Buf shift state: 0x01<br><br>Link: 10MB/s Full Duplex<br>TFTP from server 192.168.2.130; our IP address is 192.168.2.127<br>Filename 'scp_zimage'.<br>Load address: 0x8000<br>Loading: #################################################################<br>
#################################################################<br> #################################################################<br> ####<br>done<br>Bytes transferred = 1017236 (f8594 hex)<br><br>Now I used bootm command see below<br><br>USCP# bootm 0x8000<br>## Booting image at 00008000 ...<br> Image Name:<br> Image Type: ARM Linux Kernel Image (uncompressed)<br> Data Size: 1017172 Bytes = 993.3 kB<br> Load Address: 00008000<br> Entry Point: 00008000<br> Verifying Checksum ... OK<br> XIP Kernel Image ... OK<br><br>Starting kernel ...<br><br>hanging at Starting kernel .. why I dont know pls help me<br><br>but it bootm commands works at 00007fc0 address but not working at
0x8000<br>pls help me<br><br>USCP# bootm<br>## Booting image at 00007fc0 ...<br>Bad Magic Number<br>USCP# tftpboot 0x7fc0 scp_zimage<br>boot port is 0<br>Using port: EthA<br>RX Buf shift state: 0x01<br><br>Link: 10MB/s Full Duplex<br>TFTP from server 192.168.2.130; our IP address is 192.168.2.127<br>Filename 'scp_zimage'.<br>Load address: 0x7fc0<br>Loading: #################################################################<br> #################################################################<br> #################################################################<br> ####<br>done<br>Bytes transferred = 1017236 (f8594 hex)<br><br>USCP# bootm 0x7fc0<br>## Booting image at 00007fc0 ...<br> Image Name:<br> Image Type: ARM Linux Kernel Image (uncompressed)<br> Data Size:
1017172 Bytes = 993.3 kB<br> Load Address: 00008000<br> Entry Point: 00008000<br> Verifying Checksum ... OK<br>OK<br><br>Starting kernel ...<br><br>Uncompressing Linux.............................................................<br>......... done, booting the kernel.<br>mcs1000 console initLinux version 2.6.9 (rao@proliant) (gcc version 3.3.1) #152<br>Mon Aug 7 12:46:37 IST 2006<br>CPU: ARM926EJ-Sid(wb) [41069263] revision 3 (ARMv5TEJ)<br>CPU: D VIPT write-back cache<br>CPU: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets<br>CPU: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets<br>...................Its working fine<br><br>why its not working at 0x8000 pls help me<br><br><br>Thanks & Regards <br>Srinivas Rao.Ch<br><br><br><br><BR><BR>Thanks & Regards<br>Srinivas Rao.Ch<p> 
<hr size=1></hr>
Here's a new way to find what you're looking for - <a href="http://us.rd.yahoo.com/mail/in/yanswers/*http://in.answers.yahoo.com/">Yahoo! Answers</a> <BR>
Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. <a href="http://us.rd.yahoo.com/mail/in/messengertagline/*http://in.messenger.yahoo.com">Get it NOW</a>