My customized board has MPC8345E (almost same as mpc8349) processor and
128M sdram. Now we're trying to boot kernel from u-boot, I
downloaded kernel image on locate 0xff300000, and I verified the flash
contents which are written successfuly. However, when I try to boot it,
it prints some traceback then reset.<br>
<br>
=> go 0xff300000<br>
## Starting application at 0xFF300000 ...<br>
NIP: FF300000 XER: 00000000 LR: 0FFE17A8 REGS: 0f5d0c60 TRAP: 0700 DAR: 100D3000<br>
MSR: 0002b002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00<br>
<br>
GPR00: 0FFE1798 0F5D0D50 CFD364C5 00000001 0F5D3334 00000010 FFFFFFFE 00000007<br>
GPR08: 00000041 00000020 00000000 FFFFFFFF 00000030 9C4344C7 10000000 100D3000<br>
GPR16: 00000000 00000000 00000000 0000000B 00000000 00000000 00000001 00000000<br>
GPR24: 00000000 00000000 00000000 0F5D3334 FF300000 0F5D0F5C 10000618 00000001<br>
Call backtrace:<br>
0FFE1798 0FFE9A18 0FFE9D38 0FFE9FC0 0FFEB024 0FFEB20C 0FFE0B64<br>
0FFD7670 0FFD64D8<br>
Program Check Exception<br>
Resetting the board.<br>
<br>
Could anyone give some hints what could be problem? Does code enter
kernel or still in u-boot? How to decode traceback on linux? objdump?<br>
<br>
Thanks.<br>
<br>
- Reeve<br>
<br>