U-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc. CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8245 Unity ##Test not implemented yet## I2C: ready DRAM: 64 MB FLASH: S29GL128N, 16 MB In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 1  0 => erase ffe60000 ffe9ffff . done Erased 2 sectors => loadb 300000   0000 ## Ready for binary (kermit) download to 0x03000000 at 115200 bps... ## Total Size = 0x0002855c = 165212 Bytes ## Start Addr = 0x03000000 => cp.b 3000000 ffe600000  29000 Copy to Flash... done => go ffe60100 ## Starting application at 0xFFE60100 ... U-Boot 1.1.6 (Dec 5 2006 - 22:20:29) OpenTS(b) CPU: MPC8241 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: QNAP TS-101/TS-201 local bus at 133.333 MHz I2C: ready DRAM: 64 MB FLASH: 16 MB In: serial Out: serial Err: serial Net: Marc: eth_initialize called e1000#0: iobase 0xc0000000 Marc: checking the MAC and Phy settings e1000_set_mac_type Marc: Config AP1000 defined Marc: Dev ID is :4110 Marc: Checking various mac tags NIP: 00000000 XER: 00000000 LR: 00001188 REGS: 03f30da0 TRAP: 0700 DAR: 00000000 MSR: 00081000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 GPR00: C0000008 03F30E90 FFFFFF1F 00000000 0000000A 03F30D50 FFFFFFF8 00000003 GPR08: 00000002 C0000000 FFFFFFFF 03F30C40 00000000 14000400 03FFF000 04171000 GPR16: 00000001 FFFFFFFF 00000000 03F2DC98 00000001 00000001 00000000 00000001 GPR24: 00000000 03F511F8 00000001 03F511B8 00000000 03F30F98 03FFF658 03F511F8 Call backtrace: Program Check Exception U-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc. CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8245 Unity ##Test not implemented yet## I2C: ready DRAM: 64 MB FLASH: S29GL128N, 16 MB In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 1  0 ## Booting image at ff000000 ... Image Name: QNAP Linux-2.6.12.3 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1932978 Bytes = 1.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff200000 ... Image Name: QNAP RAM Disk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 2663702 Bytes = 2.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 03ca2000, end 03f2c516 ... OK Linux version 2.6.12.3 (root@NasPPC.qnap.com.tw) (gcc version 3.4.3) #1 Wed Nov 8 03:16:12 CST 2006 Motorola SPS Sandpoint Test Platform Port by QNAP Systems, Inc. (sales@qnap.com.tw) Built 1 zonelists Kernel command line: console=ttyS0,115200n8 root=/dev/ram OpenPIC Version 1.2 (1 CPUs and 10 IRQ sources) at fdf40000 PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x25 ..... ..... CUT