<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/1.1.8">
</HEAD>
<BODY>
Hi,<BR>
<BR>
<BR>
I'm Vishal. Working on the project '<B>arm linux porting to at91rm9200dk</B>'.I have <B>cross-compiled</B> the linux kernel 2.6.11 for arm architecture and then converted <B>zimag</B>e to <B>uImage</B> using <B>mkimage</B> tool.<BR>
The uImage I've downloaded successfully through serial port. While booting using <B>bootm</B> command from prompt on hyper terminal ,I got the error as follows:<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="10" WIDTH="100%">
<TR>
<TD>
<FONT SIZE="3"><TT>AT91RM9200-DK> <B>loadb</B> <B>0x20000000</B><BR>
## Ready for binary (kermit) download ...<BR>
## Start Addr = 0x20000000<BR>
AT91RM9200-DK> <B>bootm 0x20000000</B><BR>
## Booting image at 20000000 ...<BR>
Image Name: Linux-2.6.11-patch<BR>
Image Type: ARM Linux Kernel Image (uncompressed)<BR>
Data Size: 851208 Bytes = 831 kB = 0 MB<BR>
Load Address: 20008000<BR>
Entry Point: 20008000<BR>
Verifying Checksum ... OK<BR>
Loading Kernel Image ... 851208 bytes from 0x20000040 to 0x20008000OK<BR>
<B>Can't boot image type 2</B><BR>
AT91RM9200-DK><BR>
<BR>
<BR>
What may be the causes for this problem.Need the help in this regard.<BR>
<BR>
<BR>
Thanks and Regards<BR>
</TT></FONT><BR>
</TD>
</TR>
</TABLE>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Vishal M <<A HREF="mailto:vishal.m@globaledgesoft.com">vishal.m@globaledgesoft.com</A>>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>