This patch adds a driver for the following smsc network controllers: LAN9115 LAN9116 LAN9117 LAN9215 LAN9216 LAN9217 Signed-off-by: Sascha Hauer --- drivers/Makefile | 2 drivers/smc911x.c | 668 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 669 insertions(+), 1 deletion(-) Index: u-boot-git/drivers/Makefile =================================================================== --- u-boot-git.orig/drivers/Makefile +++ u-boot-git/drivers/Makefile @@ -43,7 +43,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atme sed13806.o sed156x.o \ serial.o serial_max3100.o \ serial_pl010.o serial_pl011.o serial_xuartlite.o \ - sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ + sl811_usb.o sm501.o smc91111.o smc911x.o smiLynxEM.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ Index: u-boot-git/drivers/smc911x.c =================================================================== --- /dev/null +++ u-boot-git/drivers/smc911x.c @@ -0,0 +1,668 @@ +/* + * SMSC LAN9[12]1[567] Network driver + * + * (c) 2007 Pengutronix, Sascha Hauer + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#ifdef CONFIG_DRIVER_SMC911X + +#include +#include +#include + +#define mdelay(n) udelay((n)*1000) + +#define __REG(x) (*((volatile u32 *)(x))) + +/* Below are the register offsets and bit definitions + * of the Lan911x memory space + */ +#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00) + +#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20) +#define TX_CMD_A_INT_ON_COMP (0x80000000) +#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000) +#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000) +#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000) +#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000) +#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000) +#define TX_CMD_A_INT_FIRST_SEG (0x00002000) +#define TX_CMD_A_INT_LAST_SEG (0x00001000) +#define TX_CMD_A_BUF_SIZE (0x000007FF) +#define TX_CMD_B_PKT_TAG (0xFFFF0000) +#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000) +#define TX_CMD_B_DISABLE_PADDING (0x00001000) +#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF) + +#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40) +#define RX_STS_PKT_LEN (0x3FFF0000) +#define RX_STS_ES (0x00008000) +#define RX_STS_BCST (0x00002000) +#define RX_STS_LEN_ERR (0x00001000) +#define RX_STS_RUNT_ERR (0x00000800) +#define RX_STS_MCAST (0x00000400) +#define RX_STS_TOO_LONG (0x00000080) +#define RX_STS_COLL (0x00000040) +#define RX_STS_ETH_TYPE (0x00000020) +#define RX_STS_WDOG_TMT (0x00000010) +#define RX_STS_MII_ERR (0x00000008) +#define RX_STS_DRIBBLING (0x00000004) +#define RX_STS_CRC_ERR (0x00000002) +#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44) +#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48) +#define TX_STS_TAG (0xFFFF0000) +#define TX_STS_ES (0x00008000) +#define TX_STS_LOC (0x00000800) +#define TX_STS_NO_CARR (0x00000400) +#define TX_STS_LATE_COLL (0x00000200) +#define TX_STS_MANY_COLL (0x00000100) +#define TX_STS_COLL_CNT (0x00000078) +#define TX_STS_MANY_DEFER (0x00000004) +#define TX_STS_UNDERRUN (0x00000002) +#define TX_STS_DEFERRED (0x00000001) +#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C) +#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50) +#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */ +#define ID_REV_REV_ID (0x0000FFFF) /* RO */ + +#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54) +#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */ +#define INT_CFG_INT_DEAS_CLR (0x00004000) +#define INT_CFG_INT_DEAS_STS (0x00002000) +#define INT_CFG_IRQ_INT (0x00001000) /* RO */ +#define INT_CFG_IRQ_EN (0x00000100) /* R/W */ +#define INT_CFG_IRQ_POL (0x00000010) /* R/W Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W Not Affected by SW Reset */ + +#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58) +#define INT_STS_SW_INT (0x80000000) /* R/WC */ +#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */ +#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */ +#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */ +#define INT_STS_RXDF_INT (0x00400000) /* R/WC */ +#define INT_STS_TX_IOC (0x00200000) /* R/WC */ +#define INT_STS_RXD_INT (0x00100000) /* R/WC */ +#define INT_STS_GPT_INT (0x00080000) /* R/WC */ +#define INT_STS_PHY_INT (0x00040000) /* RO */ +#define INT_STS_PME_INT (0x00020000) /* R/WC */ +#define INT_STS_TXSO (0x00010000) /* R/WC */ +#define INT_STS_RWT (0x00008000) /* R/WC */ +#define INT_STS_RXE (0x00004000) /* R/WC */ +#define INT_STS_TXE (0x00002000) /* R/WC */ +//#define INT_STS_ERX (0x00001000) /* R/WC */ +#define INT_STS_TDFU (0x00000800) /* R/WC */ +#define INT_STS_TDFO (0x00000400) /* R/WC */ +#define INT_STS_TDFA (0x00000200) /* R/WC */ +#define INT_STS_TSFF (0x00000100) /* R/WC */ +#define INT_STS_TSFL (0x00000080) /* R/WC */ +//#define INT_STS_RXDF (0x00000040) /* R/WC */ +#define INT_STS_RDFO (0x00000040) /* R/WC */ +#define INT_STS_RDFL (0x00000020) /* R/WC */ +#define INT_STS_RSFF (0x00000010) /* R/WC */ +#define INT_STS_RSFL (0x00000008) /* R/WC */ +#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */ +#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */ +#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */ +#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C) +#define INT_EN_SW_INT_EN (0x80000000) /* R/W */ +#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */ +#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */ +#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */ +//#define INT_EN_RXDF_INT_EN (0x00400000) /* R/W */ +#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */ +#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */ +#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */ +#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */ +#define INT_EN_PME_INT_EN (0x00020000) /* R/W */ +#define INT_EN_TXSO_EN (0x00010000) /* R/W */ +#define INT_EN_RWT_EN (0x00008000) /* R/W */ +#define INT_EN_RXE_EN (0x00004000) /* R/W */ +#define INT_EN_TXE_EN (0x00002000) /* R/W */ +//#define INT_EN_ERX_EN (0x00001000) /* R/W */ +#define INT_EN_TDFU_EN (0x00000800) /* R/W */ +#define INT_EN_TDFO_EN (0x00000400) /* R/W */ +#define INT_EN_TDFA_EN (0x00000200) /* R/W */ +#define INT_EN_TSFF_EN (0x00000100) /* R/W */ +#define INT_EN_TSFL_EN (0x00000080) /* R/W */ +//#define INT_EN_RXDF_EN (0x00000040) /* R/W */ +#define INT_EN_RDFO_EN (0x00000040) /* R/W */ +#define INT_EN_RDFL_EN (0x00000020) /* R/W */ +#define INT_EN_RSFF_EN (0x00000010) /* R/W */ +#define INT_EN_RSFL_EN (0x00000008) /* R/W */ +#define INT_EN_GPIO2_INT (0x00000004) /* R/W */ +#define INT_EN_GPIO1_INT (0x00000002) /* R/W */ +#define INT_EN_GPIO0_INT (0x00000001) /* R/W */ + +#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64) +#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68) +#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */ +#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */ +#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */ + +#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C) +#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */ +#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */ +#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */ +#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */ +#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */ +#define RX_CFG_RX_DUMP (0x00008000) /* R/W */ +#define RX_CFG_RXDOFF (0x00001F00) /* R/W */ +//#define RX_CFG_RXBAD (0x00000001) /* R/W */ + +#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70) +//#define TX_CFG_TX_DMA_LVL (0xE0000000) /* R/W */ +//#define TX_CFG_TX_DMA_CNT (0x0FFF0000) /* R/W Self Clearing */ +#define TX_CFG_TXS_DUMP (0x00008000) /* Self Clearing */ +#define TX_CFG_TXD_DUMP (0x00004000) /* Self Clearing */ +#define TX_CFG_TXSAO (0x00000004) /* R/W */ +#define TX_CFG_TX_ON (0x00000002) /* R/W */ +#define TX_CFG_STOP_TX (0x00000001) /* Self Clearing */ + +#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74) +#define HW_CFG_TTM (0x00200000) /* R/W */ +#define HW_CFG_SF (0x00100000) /* R/W */ +#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */ +#define HW_CFG_TR (0x00003000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */ +#define HW_CFG_SMI_SEL (0x00000010) /* R/W */ +#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */ +#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */ +#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */ +#define HW_CFG_SRST_TO (0x00000002) /* RO */ +#define HW_CFG_SRST (0x00000001) /* Self Clearing */ + +#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78) +#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */ + +#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C) +#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */ +#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */ + +#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80) +#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */ +#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */ + +#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84) +#define PMT_CTRL_PM_MODE (0x00003000) /* Self Clearing */ +#define PMT_CTRL_PHY_RST (0x00000400) /* Self Clearing */ +#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */ +#define PMT_CTRL_ED_EN (0x00000100) /* R/W */ +#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_WUPS (0x00000030) /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */ +#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */ +#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */ +#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */ +#define PMT_CTRL_PME_IND (0x00000008) /* R/W */ +#define PMT_CTRL_PME_POL (0x00000004) /* R/W */ +#define PMT_CTRL_PME_EN (0x00000002) /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_READY (0x00000001) /* RO */ + +#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88) +#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */ +#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */ +#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */ +#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */ +#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */ +#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */ +#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */ +#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */ +#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */ +#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */ +#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */ +#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */ +#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */ +#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */ +#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */ + +#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C) +#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */ +#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */ + +#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90) +#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */ + +#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98) +#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C) +#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0) +#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4) +#define MAC_CSR_CMD_CSR_BUSY (0x80000000) /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */ + +#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8) +#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC) +#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */ +#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */ +#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */ +#define AFC_CFG_FCMULT (0x00000008) /* R/W */ +#define AFC_CFG_FCBRD (0x00000004) /* R/W */ +#define AFC_CFG_FCADD (0x00000002) /* R/W */ +#define AFC_CFG_FCANY (0x00000001) /* R/W */ + +#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0) +#define E2P_CMD_EPC_BUSY (0x80000000) /* Self Clearing */ +#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */ +#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */ +#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */ + +#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4) +#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */ +/* end of LAN register offsets and bit definitions */ + +/* MAC Control and Status registers */ +#define MAC_CR (0x01) /* R/W */ + +/* MAC_CR - MAC Control Register */ +#define MAC_CR_RXALL (0x80000000) +// TODO: delete this bit? It is not described in the data sheet. +#define MAC_CR_HBDIS (0x10000000) +#define MAC_CR_RCVOWN (0x00800000) +#define MAC_CR_LOOPBK (0x00200000) +#define MAC_CR_FDPX (0x00100000) +#define MAC_CR_MCPAS (0x00080000) +#define MAC_CR_PRMS (0x00040000) +#define MAC_CR_INVFILT (0x00020000) +#define MAC_CR_PASSBAD (0x00010000) +#define MAC_CR_HFILT (0x00008000) +#define MAC_CR_HPFILT (0x00002000) +#define MAC_CR_LCOLL (0x00001000) +#define MAC_CR_BCAST (0x00000800) +#define MAC_CR_DISRTY (0x00000400) +#define MAC_CR_PADSTR (0x00000100) +#define MAC_CR_BOLMT_MASK (0x000000C0) +#define MAC_CR_DFCHK (0x00000020) +#define MAC_CR_TXEN (0x00000008) +#define MAC_CR_RXEN (0x00000004) + +#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ +#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ +#define HASHH (0x04) /* R/W */ +#define HASHL (0x05) /* R/W */ + +#define MII_ACC (0x06) /* R/W */ +#define MII_ACC_PHY_ADDR (0x0000F800) +#define MII_ACC_MIIRINDA (0x000007C0) +#define MII_ACC_MII_WRITE (0x00000002) +#define MII_ACC_MII_BUSY (0x00000001) + +#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ + +#define FLOW (0x08) /* R/W */ +#define FLOW_FCPT (0xFFFF0000) +#define FLOW_FCPASS (0x00000004) +#define FLOW_FCEN (0x00000002) +#define FLOW_FCBSY (0x00000001) + +#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1 (0x0000ffff) + +#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2 (0x0000ffff) + +#define WUFF (0x0B) /* WO */ + +#define WUCSR (0x0C) /* R/W */ +#define WUCSR_GUE (0x00000200) +#define WUCSR_WUFR (0x00000040) +#define WUCSR_MPR (0x00000020) +#define WUCSR_WAKE_EN (0x00000004) +#define WUCSR_MPEN (0x00000002) + +/* Chip ID values */ +#define CHIP_9115 0x115 +#define CHIP_9116 0x116 +#define CHIP_9117 0x117 +#define CHIP_9118 0x118 +#define CHIP_9215 0x115a +#define CHIP_9216 0x116a +#define CHIP_9217 0x117a +#define CHIP_9218 0x118a + +struct chip_id { + u16 id; + char *name; +}; + +static const struct chip_id chip_ids[] = { + { CHIP_9115, "LAN9115" }, + { CHIP_9116, "LAN9116" }, + { CHIP_9117, "LAN9117" }, + { CHIP_9118, "LAN9118" }, + { CHIP_9215, "LAN9215" }, + { CHIP_9216, "LAN9216" }, + { CHIP_9217, "LAN9217" }, + { CHIP_9218, "LAN9218" }, + { 0, NULL }, +}; + +//static const char drivername[] = "smc911x"; +#define DRIVERNAME "smc911x" + +u32 smc911x_get_mac_csr(u8 reg) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + + return MAC_CSR_DATA; +} + +void smc911x_set_mac_csr(u8 reg, u32 data) +{ + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + MAC_CSR_DATA = data; + MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg; + while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); +} + +static int smx911x_handle_mac_address(bd_t *bd) +{ + unsigned long addrh, addrl; + unsigned char *m = bd->bi_enetaddr; + + /* if the environment has a valid mac address then use it */ + if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) { + addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24; + addrh = m[4] | m[5] << 8; + smc911x_set_mac_csr(ADDRH, addrh); + smc911x_set_mac_csr(ADDRL, addrl); + } else { + /* if not, try to get one from the eeprom */ + addrh = smc911x_get_mac_csr(ADDRH); + addrl = smc911x_get_mac_csr(ADDRL); + + m[0] = (addrl ) & 0xff; + m[1] = (addrl >> 8 ) & 0xff; + m[2] = (addrl >> 16 ) & 0xff; + m[3] = (addrl >> 24 ) & 0xff; + m[4] = (addrh ) & 0xff; + m[5] = (addrh >> 8 ) & 0xff; + + /* we get 0xff when there is no eeprom connected */ + if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) { + printf(DRIVERNAME ": no valid mac address in environment " + "and no eeprom found\n"); + return -1; + } + } + + printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + m[0], m[1], m[2], m[3], m[4], m[5]); + + return 0; +} + +static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr( MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + *val = smc911x_get_mac_csr(MII_DATA); + + return 0; +} + +static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val) +{ + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + + smc911x_set_mac_csr(MII_DATA, val); + smc911x_set_mac_csr(MII_ACC, + phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE); + + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + return 0; +} + +static int smc911x_phy_reset(void) +{ + u32 reg; + + reg = PMT_CTRL; + reg &= ~0xfffff030; + reg |= PMT_CTRL_PHY_RST; + PMT_CTRL = reg; + + mdelay(100); + + return 0; +} + +static void smc911x_phy_configure(void) +{ + int timeout; + u16 status; + + smc911x_phy_reset(); + + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET); + mdelay(1); + smc911x_miiphy_write(1, PHY_ANAR, 0x01e1); + smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); + + timeout = 5000; + do { + mdelay(1); + if ((timeout--) == 0) + goto err_out; + + if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0) + goto err_out; + } while (!(status & PHY_BMSR_LS)); + + printf(DRIVERNAME ": phy initialized\n"); + + return; + +err_out: + printf(DRIVERNAME ": autonegotiation timed out\n"); +} + +static void smc911x_reset(void) +{ + int timeout; + + /* Take out of PM setting first */ + if (PMT_CTRL & PMT_CTRL_READY) { + /* Write to the bytetest will take out of powerdown */ + BYTE_TEST = 0x0; + + timeout = 10; + + while ( timeout-- && !(PMT_CTRL & PMT_CTRL_READY)) + udelay(10); + if (!timeout) { + printf(DRIVERNAME + ": timeout waiting for PM restore\n"); + return; + } + } + + /* Disable interrupts */ + INT_EN = 0; + + HW_CFG = HW_CFG_SRST; + + timeout = 1000; + while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY) + udelay(10); + + if(!timeout) { + printf(DRIVERNAME ": reset timeout\n"); + return; + } + + /* Reset the FIFO level and flow control settings */ + smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN); + AFC_CFG = 0x0050287F; + + /* Set to LED outputs */ + GPIO_CFG = 0x70070000; +} + +static void smc911x_enable(void) +{ + /* Enable TX */ + HW_CFG = 8 << 16 | HW_CFG_SF; + + GPT_CFG = GPT_CFG_TIMER_EN | 10000; + + TX_CFG = TX_CFG_TX_ON; + + /* no padding to start of packets */ + RX_CFG = 0; + + smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); + +} + +int eth_init(bd_t *bd) +{ + unsigned long val, i; + + printf(DRIVERNAME ": initializing\n"); + + val = BYTE_TEST; + if(val != 0x87654321) { + printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val); + goto err_out; + } + + val = ID_REV >> 16; + for(i = 0; chip_ids[i].id != 0; i++) { + if (chip_ids[i].id == val) break; + } + if (!chip_ids[i].id) { + printf(DRIVERNAME ": Unknown chip ID %04x\n", val); + goto err_out; + } + + printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name); + + smc911x_reset(); + + /* Configure the PHY, initialize the link state */ + smc911x_phy_configure(); + + if (smx911x_handle_mac_address(bd)) + goto err_out; + + /* Turn on Tx + Rx */ + smc911x_enable(); + + return 0; + +err_out: + return -1; +} + +int eth_send(volatile void *packet, int length) +{ + u32 *data = (u32*)packet; + u32 tmplen; + u32 status; + + TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length; + TX_DATA_FIFO = length; + + tmplen = (length + 3) / 4; + + while(tmplen--) + TX_DATA_FIFO = *data++; + + /* wait for transmission */ + while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16)); + + /* get status. Ignore 'no carrier' error, it has no meaning for + * full duplex operation + */ + status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL | + TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN); + + if(!status) + return 0; + + printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n", + status & TX_STS_LOC ? "TX_STS_LOC " : "", + status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "", + status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "", + status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "", + status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : ""); + + return -1; +} + +void eth_halt(void) +{ + smc911x_reset(); +} + +int eth_rx(void) +{ + u32 *data = (u32 *)NetRxPackets[0]; + u32 pktlen, tmplen; + u32 status; + + if((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) { + status = RX_STATUS_FIFO; + pktlen = (status & RX_STS_PKT_LEN) >> 16; + + RX_CFG = 0; + + tmplen = (pktlen + 2+ 3) / 4; + while(tmplen--) + *data++ = RX_DATA_FIFO; + + if(status & RX_STS_ES) + printf(DRIVERNAME + ": dropped bad packet. Status: 0x%08x\n", + status); + else + NetReceive(NetRxPackets[0], pktlen); + } + + return 0; +} + +#endif /* CONFIG_DRIVER_SMC911X */ -- Dipl.-Ing. Sascha Hauer | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hannoversche Str. 2, 31134 Hildesheim, Germany Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9