<br><font size=2 face="sans-serif">Hi all,</font>
<br><font size=2 face="sans-serif">I am quite new to U-Boot,</font>
<br>
<br><font size=2 face="sans-serif">'m trying to change u-boot 1.2.0 distribution
for Freescale Argonavis evaluation board (mounting FSL 8641D) in order
to obtain the following behaviour:</font>
<br><font size=2 face="sans-serif">- run u-boot on core1 instead f core0
ASAP.</font>
<br><font size=2 face="sans-serif">My "state-of-the art" is the
following: in start.S (cold_boot) when running from core0 (startup core)
I unlock core1 MPX bus, then I raise a hreset to core1 via PRR: at
this point core0 has finished.</font>
<br><font size=2 face="sans-serif">Then, core1 starts and executes u-boot
normally.</font>
<br><font size=2 face="sans-serif">Point is: u-boot is executed, got prompt,
etc... but some of the peripherals does not work. For instance, I cannot
receive or transmit ethernet frames through any of the 4 ports.</font>
<br>
<br><font size=2 face="sans-serif">Any hint on how to proceed?</font>
<br>
<br><font size=2 face="sans-serif">Another problem is obtaining an up-to-date
source tree from a ftp site: I do not have access to cvs repositories from
my intranet due to my ISA server, but current 1.2.0 officially downloadable
from DENX</font>
<br><font size=2 face="sans-serif">ftp site seems to miss all the 8641D-specific
changes I've seen browsing the u-boot-users mailing list. Is there ftp
access to the latest development line?</font>
<br>
<br><font size=2 face="sans-serif">Thanks in advance!</font>
<br>
<br><font size=2 face="sans-serif">luigi</font>
<br>
<br><font size=2 face="sans-serif">- - - - - - - - - - - - - - - - - -
- - - - - - - - - - - <br>
Luigi Campora<br>
Sirti S.p.A.<br>
TR-LH Divisione Trasporti<br>
Via Bombrini, 11/4<br>
16149 Genova<br>
tel: +39 010 65948 36<br>
fax: +39 010 65948 22<br>
cell: +39 335 7470015<br>
Web: www.sirti.it<br>
email: L.Campora@sirti.it<br>
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - <br>
<br>
</font>