<div>Hi Stefan,</div> <div> </div> <div>I assigned the ethaddr as 192.168.13.246 and after that i run the command "saveenv " and reset the board. I got the following<BR>Net: ppc_4xx_eth0. once i get the shell prompt i assign the ipaddr as 192.168.13.241 and after that i run the command "saveenv" and reset the board. Now i tried to ping my Host PC which has the IP address as 192.168.13.240, i am getting the following error.....I am not able to ping the host IP. Can you please show some way to come of this issue.....<BR>=> ping 192.168.13.240<BR>Trying ppc_4xx_eth0<BR>PHY speed read failed, assuming 10bT<BR>PHY duplex read failed, assuming half duplex<BR>ENET Speed is 10 Mbps - HALF duplex connection<BR>Using ppc_4xx_eth0 device<BR>sending ARP for c0a80df0<BR>ARP broadcast 1<BR>ARP broadcast 2<BR>ping failed; host 192.168.13.240 is not alive<BR>=></div> <div>Regards,<BR>Shami...<BR><BR><BR><B><I>Stefan Roese <sr@denx.de></I></B> wrote:</div> <BLOCKQUOTE
class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">On Wednesday 19 December 2007, shami Allam wrote:<BR>> I am working on the 405GP custome board. I am able to bringup the<BR>> SDRAM,Flash,I2c and serail on the board. But while trying to bringup the<BR>> ethernet i am getting the following error. "No Ethernet found". On my board<BR>> there is "DP83848I" PHY chip.<BR><BR>This message gets printed when you don't define the "ethaddr" environement <BR>address. So set this variable to a valid value and save the environment and <BR>reset the board. Then you should see one eth-interface.<BR><BR>Best regards,<BR>Stefan<BR><BR>=====================================================================<BR>DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel<BR>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany<BR>Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email:
office@denx.de<BR>=====================================================================<BR></BLOCKQUOTE><BR><p> 
<!--5--><hr size=1></hr> Get the freedom to save as many mails as you wish. <a href="http://in.rd.yahoo.com/tagline_mail_5/*http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/">Click here to know how.</a>