<div>Thanks for the information. But I read some where that for the Lab testing purpose that I can give the IP address!!!!!</div> <div>I am able to read the PHY inforamtion by command mii info 0x01<PHY Addr>. Following is the info....<BR>=> mii info 0x01<BR>PHY_PHYIDR2 @ 0x1 = 0x5c90<BR>PHY_PHYIDR[1,2] @ 0x1 = 0x20005c90<BR>PHY_BMCR value is 0x2100<BR>PHY 0x01: OUI = 0x80017, Model = 0x09, Rev = 0x00, 100baseT, FDX<BR>=></div> <div>But my Link LED is not glowing at all. Always my Link status shows "Not Active" can anyone throw some light for me.....</div> <div>Regards,<BR>Shami...</div> <div><BR><BR><B><I>Stefan Roese <sr@denx.de></I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Hi Shami,<BR><BR>On Thursday 20 December 2007, shami Allam wrote:<BR>> I assigned the ethaddr as 192.168.13.246 and after that i run the command<BR>> "saveenv " and reset the board.<BR><BR>As
Wolfgang already mentioned, this is *not* an ethernet address but an IP <BR>address.<BR><BR>> I got the following Net: ppc_4xx_eth0. once <BR>> i get the shell prompt i assign the ipaddr as 192.168.13.241 and after that<BR>> i run the command "saveenv" and reset the board. Now i tried to ping my<BR>> Host PC which has the IP address as 192.168.13.240, i am getting the<BR>> following error.....I am not able to ping the host IP. Can you please show<BR>> some way to come of this issue..... => ping 192.168.13.240<BR>> Trying ppc_4xx_eth0<BR>> PHY speed read failed, assuming 10bT<BR>> PHY duplex read failed, assuming half duplex<BR>> ENET Speed is 10 Mbps - HALF duplex connection<BR><BR>Did you configure the PHY address correctly? What does "mii info" show? how <BR>did you configure the PHY address in your board config file?<BR><BR>Best regards,<BR>Stefan<BR><BR>=====================================================================<BR>DENX
Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel<BR>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany<BR>Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de<BR>=====================================================================<BR></BLOCKQUOTE><BR><p> 
<!--5--><hr size=1></hr> Now you can chat without downloading messenger. <a href="http://in.rd.yahoo.com/tagline_webmessenger_5/*http://in.messenger.yahoo.com/webmessengerpromo.php">Click here</a> to know how.