<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid"> <div>On Saturday 22 December 2007, shami Allam wrote:<BR>> After booting my target i get the following message..<BR>><BR>> I2C:ready<BR>> DRAM:16MB<BR>> FLASH:2MB<BR>> In: serial<BR>> Out:serial<BR>> Err:serial<BR>> Net: ppc_4xx_eth0<BR>> =><BR>> and after that if i say<BR>> => mii info<BR>> PHY 0x01: OUI = 0x80017, Model = 0x09, Rev = 0x00, 10baseT, HDX<BR><BR>And is this correct? Do you have a 10MBit connection?</div> <div> </div> <div>it support both 100baseT and 10baseT.<BR><BR>> => setenv ipaddr 192.168.13.248<BR>> => ping 192.168.13.248<BR><BR>So you try to ping to yourself here. This does not work. You have to ping to a <BR>different target (PC).</div> <div> </div> <div>Yes i tried to ping the Host PC (i.e) 192.168.13.240. But still i am not getting reply.....<BR><BR>> After this if i ping
it's not pinging self and also the host<BR>> ip(192.168.13.240). Can you help me out what could be the problem..... =><BR>> mii read 0x01<PHY Addr> 0x01<REGISTER val><BR>> when i read the PHY 0x01 register following is the value 0x7849. This<BR>> value show that "No Link". why so. PHY chip i am using DP83848I<BR><BR>Possibly a PHY configuartion problem. Did you check if you soldered the <BR>correct resistors and condensators? Is the power-supply ok?</div> <div> </div> <div>if I do the PHY loopback by enabling the bit 14bit in the BMCR. i am getting the reply. Still you suspect PHY configuration problem.....or do i need to do anything at MAC side......</div> <div> </div> <div>Regards,</div> <div>Shami.</div></BLOCKQUOTE><p> 
<!--1--><hr size=1></hr> Download prohibited? No problem. <a href="http://in.rd.yahoo.com/tagline_webmessenger_1/*http://in.messenger.yahoo.com/webmessengerpromo.php">CHAT</a> from any browser, without download.