<br>Greetings from Austin, TX. My first posting to this list. Searched through the archives first, but didn't see any mention, so.....<br><br>On recently obtained new kilauea boards, I noted on all of them PCI init failure at boot:<br><br>U-Boot 1.3.1-g5dd372a2 (Jan 14 2008 - 11:01:38)<br><br>CPU: AMCC PowerPC 405EX Rev. A at 400 MHz (PLB=200, OPB=100, EBC=100 MHz)<br> Security support<br> Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)<br> 16 kB I-Cache 16 kB D-Cache<br>Board: Kilauea - AMCC PPC405EX Evaluation Board<br>I2C: ready<br>DTT1: 22 C<br>DRAM: 256 MB<br>FLASH: 64 MB<br>NAND: 64 MiB<br>PCI: Bus Dev VenId DevId Class Int<br>PCIE0: link is not up.<br>PCIE0: initialization as root-complex failed<br>PCIE1: link is not up.<br>PCIE1: initialization as root-complex failed<br><br>I did a git on
ppc4xx and built/flashed that, but still seeing the same failure. Appears to die in ppc4xx_init_pcie_port() on the:<br><br> /*<br> * Verify link is up<br> */<br> val = SDR_READ(SDRN_PESDR_LOOP(port));<br> if (!(val & 0x00001000)) {<br><br>val is coming back with a value of zero. This occurs whether or not any adapters are plugged into the PCIe slots. Anyone else seeing this? <br><br>thx,<br>LH<br><br><p> 
<hr size=1>Looking for last minute shopping deals? <a href="http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/category.php?category=shopping">
Find them fast with Yahoo! Search.</a>