<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:times new roman, new york, times, serif;font-size:12pt"><div><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><div>Hi all,<br><br>After
uboot comes up, I get stuck with the booting of linux kernel. The RAM
range is from 0x30000000-0x38000000. Following are the steps I do to
get the uImage.bin.<br><br>$ arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin<br>$ gzip -9 linux.bin<br>$
../u-boot-1.3.2/tools/mkimage -A arm -O linux -T kernel -C gzip -a
0x30008000 -e 0x30008000 -n "Linux kernel" -d linux.bin.gz uImage.bin<br>Image Name: Linux kernel<br>Created: Sun Apr 6 12:19:12 2008<br>Image Type: ARM Linux Kernel Image (gzip compressed)<br>Data Size: 4271627 Bytes = 4171.51 kB = 4.07 MB<br>Load Address: 0x30008000<br>Entry Point: 0x30008000<br><br>After this I put the uImage.bin at 0x33000000, restart uboot
and I get:<br>U-Boot 1.3.2 (Apr 6 2008 - 12:03:10)<br><br>DRAM: 128 MB<br>Flash: 32 MB<br>Using default environment<br><br>In: serial<br>Out: serial<br>Err: serial<br>Hit any key to stop autoboot: 0<br>## Booting image at 33000000 ...<br> Image Name: Linux kernel<br> Image Type: ARM Linux Kernel Image (gzip compressed)<br> Data Size: 4271627 Bytes = 4.1 MB<br> Load Address: 30008000<br> Entry Point: 30008000<br> Verifying Checksum ... Bad Data CRC<br>DPB2440 #<br><br>Is
it the problem with the settings of uboot or the kernel and what should
I do to bring the linux kernel up? Where could I find more information
regarding this?<br><br>Kindly help me out.<br><br>Thanks in advance.<br>Tiju<br></div></div><br></div></div><br>
<!--2--><hr size=1></hr> Share files, take polls, and make new friends - all under one roof. <a href="http://in.rd.yahoo.com/tagline_groups_2/*http://in.promos.yahoo.com/groups/"> Click here.</a></body></html>