CREDITS           |    5 +++
 MAINTAINERS       |    4 ++
 MAKEALL           |    1 +
 Makefile          |    3 ++
 doc/README.mvblm7 |   85 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 98 insertions(+), 0 deletions(-)

diff --git a/CREDITS b/CREDITS
index e84ef38..713f58a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -424,6 +424,11 @@ N: Paolo Scaffardi
 E: arsenio@tin.it
 D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
 
+N: Andre Schwarz
+E: andre.schwarz@matrix-vision.de
+D: Support for BlueLYNX and BlueCOUGAR series
+W: www.matrix-vision.com
+
 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
diff --git a/MAINTAINERS b/MAINTAINERS
index 58f833c..7d0d1b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -367,6 +367,10 @@ Peter De Schrijver <p2@mind.be>
 
 	ML2			PPC4xx
 
+Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+	mvblm7			MPC8343
+
 Timur Tabi <timur@freescale.com>
 
 	MPC8349E-mITX		MPC8349
diff --git a/MAKEALL b/MAKEALL
index 791eabc..7bf8e52 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -329,6 +329,7 @@ LIST_83xx="		\
 	MPC8360ERDK_66	\
 	MPC837XEMDS	\
 	MPC837XERDB	\
+	MVBLM7		\
 	sbc8349		\
 	TQM834x		\
 "
diff --git a/Makefile b/Makefile
index 167a717..0535c0b 100644
--- a/Makefile
+++ b/Makefile
@@ -2096,6 +2096,9 @@ MPC837XEMDS_HOST_config:	unconfig
 MPC837XERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
 
+MVBLM7_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+
 sbc8349_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
 
diff --git a/doc/README.mvblm7 b/doc/README.mvblm7
new file mode 100644
index 0000000..fb86b5a
--- /dev/null
+++ b/doc/README.mvblm7
@@ -0,0 +1,85 @@
+Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
+-------------------------------------
+
+1.	Board Description
+
+	The mvBL-M7 is a 120x120mm single board computing platform
+	with strong focus on stereo image processing applications.
+
+	Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
+	on any port (requires add-on board).
+
+2	System Components
+
+2.1	CPU	
+	Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
+	512MByte DDR-II memory @ 133MHz.
+	8 MByte Nor Flash on local bus.
+	2 Vitesse VSC8601 RGMII ethernet Phys.
+	1 USB host controller over ULPI I/F.
+	2 serial ports. Console running on ttyS0 @ 115200 8N1.
+	1 SD-Card slot connected to SPI.
+	System configuration (HRCW) is taken from I2C EEPROM.
+
+2.2	PCI
+	A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
+	
+2.3	FPGA
+	Altera Cyclone-II EP2C20/35 with PCI DMA engines.
+	Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
+	Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
+
+2.3.1	I/O @ FPGA
+	2x8 Outputs : Infineon High-Side Switches to Main Supply.
+	2x8 Inputs  : Programmable input threshold + trigger capabilities
+	2 dedicated flash interfaces for illuminator boards.
+	Cross trigger for chaining several boards.
+
+2.4	I2C
+	Bus1: 
+		MAX5381 DAC @ 0x60 for 1st digital input threshold.
+		LM75 @ 0x90 for temperature monitoring.
+		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
+		1st image sensor interface (slave adresses depend on sensor)
+	Bus2:	
+		MAX5381 DAC @ 0x60 for 2nd digital input threshold.
+		2nd image sensor interface (slave adresses depend on sensor)
+
+3	Flash layout.
+
+	reset vector is 0xFFF00100, i.e. "HIGHBOOT".
+
+	FF800000 	environment
+	FF802000 	redundant environment
+	FF804000 	u-boot script image
+	FF806000 	redundant u-boot script image
+	FF808000 	device tree blob
+	FF80A000 	redundant device tree blob
+	FF80C000 	tbd.
+	FF80E000 	tbd.
+	FF810000 	kernel
+	FFC00000 	root FS
+	FFF00000 	u-boot
+	FFF80000 	FPGA raw bit file 
+
+	mtd partitions are propagated to linux kernel via device tree blob.
+
+4	Booting
+
+	On startup the bootscript @ FF804000 is executed. This script can be
+	exchanged easily. Default boot mode is "boot from flash", i.e. system
+	works stand-alone.
+
+	This behaviour depends on some environment variables :
+
+	"netboot" : yes ->try dhcp/bootp and boot from  network.A
+	"dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for DHCP
+	server configuration, e.g. to provide different images to different
+	devices.
+
+	During netboot the system tries to get 3 image files:
+	1. Kernel - name + data is given during BOOTP.
+	2. Initrd - name is stored in "initrd_name"
+	3. device tree blob - name is stored in "dtb_name"
+	Fallback are ther flash versions.
+