Booting `minnow max' error: no suitable video mode found. Booting in blind mode Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.55-ltsi-WR6.0.0.16_standard (tbeaman@varelse) (gcc version 4.8.1 (Wind River Linux Sourcery CodeBench 4.8-40) ) #1 SMP PREEMPT Thu Feb 19 15:50:54 EST 2015 Command line: BOOT_IMAGE=(memdisk)/boot/grub/netboot.bzImage console=ttyS0,115200n8 ramdisk_size=300000 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved BIOS-e820: [mem 0x0000000020100000-0x0000000079c64fff] usable BIOS-e820: [mem 0x0000000079c65000-0x000000007a490fff] reserved BIOS-e820: [mem 0x000000007a491000-0x000000007a590fff] ACPI NVS BIOS-e820: [mem 0x000000007a591000-0x000000007a5d0fff] ACPI data BIOS-e820: [mem 0x000000007a5d1000-0x000000007affffff] usable BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved NX (Execute Disable) protection: active efi: EFI v2.40 by EDK II efi: ACPI=0x7a5d0000 ACPI 2.0=0x7a5d0014 SMBIOS=0x79c8c000 efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB) efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB) efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001544000) (20MB) efi: mem05: type=7, attr=0xf, range=[0x0000000001544000-0x0000000002000000) (10MB) efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003444000) (20MB) efi: mem07: type=7, attr=0xf, range=[0x0000000003444000-0x0000000020000000) (459MB) efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB) efi: mem09: type=7, attr=0xf, range=[0x0000000020100000-0x000000003427a000) (321MB) efi: mem10: type=2, attr=0xf, range=[0x000000003427a000-0x0000000036135000) (30MB) efi: mem11: type=7, attr=0xf, range=[0x0000000036135000-0x000000005371b000) (469MB) efi: mem12: type=2, attr=0xf, range=[0x000000005371b000-0x0000000071000000) (472MB) efi: mem13: type=4, attr=0xf, range=[0x0000000071000000-0x0000000071020000) (0MB) efi: mem14: type=7, attr=0xf, range=[0x0000000071020000-0x000000007212d000) (17MB) efi: mem15: type=1, attr=0xf, range=[0x000000007212d000-0x00000000746df000) (37MB) efi: mem16: type=7, attr=0xf, range=[0x00000000746df000-0x00000000782f6000) (60MB) efi: mem17: type=4, attr=0xf, range=[0x00000000782f6000-0x00000000783b5000) (0MB) efi: mem18: type=7, attr=0xf, range=[0x00000000783b5000-0x0000000078425000) (0MB) efi: mem19: type=4, attr=0xf, range=[0x0000000078425000-0x0000000078428000) (0MB) efi: mem20: type=7, attr=0xf, range=[0x0000000078428000-0x000000007842b000) (0MB) efi: mem21: type=4, attr=0xf, range=[0x000000007842b000-0x0000000079191000) (13MB) efi: mem22: type=7, attr=0xf, range=[0x0000000079191000-0x00000000796c0000) (5MB) efi: mem23: type=3, attr=0xf, range=[0x00000000796c0000-0x0000000079991000) (2MB) efi: mem24: type=7, attr=0xf, range=[0x0000000079991000-0x0000000079c5c000) (2MB) efi: mem25: type=2, attr=0xf, range=[0x0000000079c5c000-0x0000000079c65000) (0MB) efi: mem26: type=6, attr=0x800000000000000f, range=[0x0000000079c65000-0x0000000079c91000) (0MB) efi: mem27: type=5, attr=0x800000000000000f, range=[0x0000000079c91000-0x0000000079e91000) (2MB) efi: mem28: type=0, attr=0xf, range=[0x0000000079e91000-0x000000007a491000) (6MB) efi: mem29: type=10, attr=0xf, range=[0x000000007a491000-0x000000007a591000) (1MB) efi: mem30: type=9, attr=0xf, range=[0x000000007a591000-0x000000007a5d1000) (0MB) efi: mem31: type=4, attr=0xf, range=[0x000000007a5d1000-0x000000007afff000) (10MB) efi: mem32: type=3, attr=0xf, range=[0x000000007afff000-0x000000007b000000) (0MB) efi: mem33: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB) SMBIOS 2.7 present. No AGP bridge found e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 __next_free_mem_range: Usage of MAX_NUMNODES is depricated. Use NUMA_NO_NODE instead Scanning 1 areas for low memory corruption init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x79a00000-0x79bfffff] init_memory_mapping: [mem 0x78000000-0x799fffff] init_memory_mapping: [mem 0x00100000-0x1fffffff] init_memory_mapping: [mem 0x20100000-0x77ffffff] init_memory_mapping: [mem 0x79c00000-0x79c64fff] init_memory_mapping: [mem 0x7a5d1000-0x7affffff] RAMDISK: [mem 0x3427a000-0x36134fff] ACPI: RSDP 000000007a5d0014 00024 (v02 INTEL ) ACPI: XSDT 000000007a5cf0e8 00084 (v01 INTEL EDK2 00000003 01000013) ACPI: FACP 000000007a5ce000 0010C (v05 INTEL EDK2 00000003 VLV2 0100000D) ACPI: DSDT 000000007a5c2000 07BC1 (v02 INTEL EDK2 00000003 VLV2 0100000D) ACPI: FACS 000000007a526000 00040 ACPI: UEFI 000000007a529000 00042 (v01 INTEL EDK2 00000002 01000013) ACPI: HPET 000000007a5cd000 00038 (v01 INTEL EDK2 00000003 VLV2 0100000D) ACPI: LPIT 000000007a5cc000 00104 (v01 INTEL EDK2 00000003 VLV2 0100000D) ACPI: APIC 000000007a5cb000 00084 (v03 INTEL EDK2 00000003 VLV2 0100000D) ACPI: MCFG 000000007a5ca000 0003C (v01 INTEL EDK2 00000003 VLV2 0100000D) ACPI: SSDT 000000007a5c1000 004AC (v01 INTEL RHPROXY 00000003 VLV2 0100000D) ACPI: SSDT 000000007a5c0000 00763 (v01 PmRef CpuPm 00003000 INTL 20141107) ACPI: SSDT 000000007a5bf000 00261 (v01 PmRef Cpu0Tst 00003000 INTL 20141107) ACPI: SSDT 000000007a5be000 0017A (v01 PmRef ApTst 00003000 INTL 20141107) ACPI: CSRT 000000007a5bd000 0014C (v00 INTEL EDK2 00000005 INTL 20120624) ACPI: FPDT 000000007a5bc000 00044 (v01 INTEL EDK2 00000002 01000013) No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000007affffff] Initmem setup node 0 [mem 0x00000000-0x7affffff] NODE_DATA [mem 0x79c62000-0x79c63fff] Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0008efff] node 0: [mem 0x00090000-0x0009dfff] node 0: [mem 0x00100000-0x1fffffff] node 0: [mem 0x20100000-0x79c64fff] node 0: [mem 0x7a5d1000-0x7affffff] x86/hpet: Will disable the HPET for this platform because it's not reliable ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 0000000020000000 - 0000000020100000 PM: Registered nosave memory: 0000000079c65000 - 000000007a491000 PM: Registered nosave memory: 000000007a491000 - 000000007a591000 PM: Registered nosave memory: 000000007a591000 - 000000007a5d1000 e820: [mem 0x7b000000-0xe00f7fff] available for PCI devices setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880079a00000 s80448 r8192 d21952 u524288 Built 1 zonelists in Node order, mobility grouping on. Total pages: 493146 Policy zone: DMA32 Kernel command line: BOOT_IMAGE=(memdisk)/boot/grub/netboot.bzImage console=ttyS0,115200n8 ramdisk_size=300000 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 1893660k/2015232k available (9288k kernel code, 11072k absent, 110500k reserved, 5936k data, 1208k init) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. NR_IRQS:16640 nr_irqs:1024 16 Console: colour dummy device 80x25 console [ttyS0] enabled allocated 8388608 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups tsc: Fast TSC calibration using PIT tsc: Detected 1333.387 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.77 BogoMIPS (lpj=1333387) pid_max: default: 32768 minimum: 301 init_memory_mapping: [mem 0x79c65000-0x79c90fff] init_memory_mapping: [mem 0x79c91000-0x79e90fff] Security Framework initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0 tlb_flushall_shift: 6 Freeing SMP alternatives: 36k freed ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ftrace: allocating 32482 entries in 127 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz (fam: 06, model: 37, stepping: 03) Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000ffffffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 smpboot: Booting Node 0, Processors #1 Brought up 2 CPUs smpboot: Total of 2 processors activated (5333.54 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) PM: Registering ACPI NVS region [mem 0x7a491000-0x7a590fff] (1048576 bytes) xor: measuring software checksum speed prefetch64-sse: 4424.000 MB/sec generic_sse: 3996.000 MB/sec xor: using function: prefetch64-sse (4424.000 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 raid6: sse2x1 445 MB/s raid6: sse2x2 503 MB/s raid6: sse2x4 863 MB/s raid6: using algorithm sse2x4 (863 MB/s) raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: SSDT 000000007a442a98 00311 (v01 PmRef Cpu0Ist 00003000 INTL 20141107) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00311 (v01 PmRef Cpu0Ist 00003000 INTL 20141107) ACPI: SSDT 000000007a441c98 00233 (v01 PmRef Cpu0Cst 00003001 INTL 20141107) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00233 (v01 PmRef Cpu0Cst 00003001 INTL 20141107) ACPI: SSDT 000000007a444e18 0015F (v01 PmRef ApIst 00003000 INTL 20141107) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20141107) ACPI: SSDT 000000007a443f18 0008D (v01 PmRef ApCst 00003000 INTL 20141107) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20141107) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Power Resource [USBC] (on) ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe] pci 0000:00:14.0: System wakeup disabled by ACPI pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1c.2: System wakeup disabled by ACPI pci 0000:00:1c.3: System wakeup disabled by ACPI pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: System wakeup disabled by ACPI pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.3: PCI bridge to [bus 03] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) acpi PNP0A08:00: ACPI _OSC control (0x1c) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: Enabled 3 GPEs in block 00 to 3F dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized ACPI: bus type ATA registered ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 Switching to clocksource refined-jiffies pnp: PnP ACPI init ACPI: bus type PNP registered system 00:03: [io 0x0680-0x069f] has been reserved system 00:03: [io 0x0400-0x047f] has been reserved system 00:03: [io 0x0500-0x05fe] has been reserved system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved system 00:05: [mem 0xfed0c000-0xfed0ffff] could not be reserved system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved pnp: PnP ACPI: found 7 devices ACPI: bus type PNP unregistered Switching to clocksource acpi_pm pci 0000:00:1c.0: BAR 14: assigned [mem 0x90c00000-0x90dfffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref] pci 0000:00:1c.3: BAR 14: can't assign mem (size 0x200000) pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000) pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:1c.3: BAR 14: assigned [mem 0x90c00000-0x90dfffff] pci 0000:00:1c.3: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000) pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000) pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: PCI bridge to [bus 02] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0x90c00000-0x90dfffff] pci 0000:00:1c.3: bridge window [mem 0x90e00000-0x90ffffff 64bit pref] NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP: reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 31468k freed microcode: CPU0 sig=0x30673, pf=0x1, revision=0x321 microcode: CPU1 sig=0x30673, pf=0x1, revision=0x321 microcode: Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds HugeTLB registered 2 MB page size, pre-allocated 0 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered bio: create slab at 1 Btrfs loaded aufs 3.10-20130819 msgmni has been set to 3814 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 80860F0A:00: ttyS1 at MMIO 0x90914000 (irq = 39) is a 16550A 80860F0A:01: ttyS2 at MMIO 0x90916000 (irq = 40) is a 16550A hpet: number irqs doesn't agree with number of timers Linux agpgart interface v0.103 i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [drm] Initialized drm 1.1.0 20060810 [drm] Memory usable by graphics device = 2048M [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 i915 0000:00:02.0: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x48 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier acpi device:20: registered as cooling_device0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 brd: module loaded loop: module loaded isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 mpt2sas version 14.100.00.00 loaded ahci 0000:00:13.0: controller can't do DEVSLP, turning off ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m2048@0x9082f000 port 0x9082f100 irq 107 ata2: DUMMY e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k igb: Copyright (c) 2007-2013 Intel Corporation. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI ixgb: Copyright (c) 1999-2008 Intel Corporation. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000442a000, 00:13:20:fe:35:79, XID 0c000880 IRQ 108 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic i8042: PNP: No PS/2 controller found. Probing ports directly. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) tsc: Refined TSC clocksource calibration: 1333.333 MHz Switching to clocksource tsc i8042: No controller found mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input4 rtc_cmos 00:00: RTC can wake from S4 rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 ata1.00: ATA-8: TOSHIBA MQ01ACF050, AV001D, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ACF0 AV00 PQ: 0 ANSI: 5 md: multipath personality registered for level -4 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usbcore: registered new interface driver btusb Intel P-state driver initializing. Intel pstate controlling: cpu 0 Intel pstate controlling: cpu 1 cpuidle: using governor ladder cpuidle: using governor menu usb 1-2: new high-speed USB device number 2 using xhci_hcd sdhci: Secure Digital Host Controller Interface driver hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using NMI interrupt. u32 classifier Actions configured TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Key type dns_resolver registered console [netcon0] enabled netconsole: network logging started rtc_cmos 00:00: setting system clock to 2015-06-11 14:43:57 UTC (1434033837) usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: gzip image found at block 0 usb 1-2.4: new full-speed USB device number 3 using xhci_hcd input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/input/input5 hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2.4/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/input/input6 hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2.4/input1 hid-generic 0003:046D:C52B.0003: device has no listeners, quitting VFS: Mounted root (ext2 filesystem) readonly on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1208k freed Write protecting the kernel read-only data: 14336k Freeing unused kernel memory: 940k freed Freeing unused kernel memory: 640k freed INIT: version 2.88 booting Starting udev udevd[81]: starting version 182 ACPI: Requesting acpi_cpufreq thermal LNXTHERM:00: registered as thermal_zone0 input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 ACPI: Thermal Zone [TZ01] (27 C) input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \SWC1 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPO2.GPOP 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPO0.GPOP 2 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPO2.GPOP 1 (20130328/utaddress-251) ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPO0.GPOP 2 (20130328/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver lpc_ich: Resource conflict(s) found affecting gpio_ich iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Starting Bootlog daemon: bootlogd. Populating dev cache Starting portmap daemon... net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 INIT: Entering runlevel: 3 Configuring network interfaces... r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2) r8169 0000:02:00.0 eth0: link down r8169 0000:02:00.0 eth0: link down IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.21.1) started Sending discover... r8169 0000:02:00.0 eth0: link up IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 10.40.101.249... Lease of 10.40.101.249 obtained, lease time 120 done. .... root@atom_230:~# cat /proc/cpuinfo | grep processor processor : 0 processor : 1