[ELDK] How to Boot a New Kernal from TFTP Server

[Wolfgang Denk]

Dear camel joe,

In message <b460ec330906121541w52a10d43n572eb2f6cc310b57 at mail.gmail.com> you wrote:
> Forgive me for my very basic questions, since I am a newbie and this
> is my first time to learn using ELDK/U-Boot.
> 
> By following the DULG for Kilauea document, I was able to build the
> kernel and to set up the TFTP server and U-boot parameters, as
> follows:
...
> But I don't know exactly what to do next for booting up the board,
> since when I use "reset" or "boot" commands, the board always is
> running with the old existing kernel that comes with the manufactory.

Just continue reading the DULG. Section "7. Booting Embedded Linux"
has all the details you need.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
... The prejudices people feel about each other disappear  when  then
get to know each other.
	-- Kirk, "Elaan of Troyius", stardate 4372.5