[ELDK] building u-boot

[Érico Porto]

Thanks, this got me a lot further

Now I'm getting

make[1]: *** No rule to make target
`/home/erico/Downloads/u-boot-2011.12-rc3/include/asm/system.h', needed by
`cmd_boot.o'.  Stop.
make[1]: Leaving directory `/home/erico/Downloads/u-boot-2011.12-rc3/common'
make: ** [common/libcommon.o] Error 2

Which is really weird because this file doesn't exist - and it is a .h,
should not be target..

Érico V. Porto


On Tue, Dec 27, 2011 at 12:33 PM, Érico Porto <ericoporto2008 at gmail.com>wrote:

> uhm.. I found some compiler tools in here:
>
> /opt/eldk-5.1/powerpc-softfloat/sysroots/i686-eldk-linux/usr/bin/powerpc-nf-linux$
> ls
> powerpc-linux-addr2line  powerpc-linux-objcopy        powerpc-softfloat-gcc
> powerpc-linux-ar         powerpc-linux-objdump
>  powerpc-softfloat-gcov
> powerpc-linux-as         powerpc-linux-ranlib         powerpc-softfloat-gdb
> powerpc-linux-c++filt    powerpc-linux-readelf
>  powerpc-softfloat-gprof
> powerpc-linux-cpp        powerpc-linux-size           powerpc-softfloat-ld
> powerpc-linux-elfedit    powerpc-linux-strings
>  powerpc-softfloat-ld.bfd
> powerpc-linux-embedspu   powerpc-linux-strip          powerpc-softfloat-nm
> powerpc-linux-g++        powerpc-softfloat-addr2line
>  powerpc-softfloat-objcopy
> powerpc-linux-gcc        powerpc-softfloat-ar
> powerpc-softfloat-objdump
> powerpc-linux-gcov       powerpc-softfloat-as
> powerpc-softfloat-ranlib
> powerpc-linux-gdb        powerpc-softfloat-c++filt
>  powerpc-softfloat-readelf
> powerpc-linux-gprof      powerpc-softfloat-cpp
>  powerpc-softfloat-size
> powerpc-linux-ld         powerpc-softfloat-elfedit
>  powerpc-softfloat-strings
> powerpc-linux-ld.bfd     powerpc-softfloat-embedspu
> powerpc-softfloat-strip
> powerpc-linux-nm         powerpc-softfloat-g++
>
> is this what I'm looking for?
>
> will try
>
> export
> CROSS_COMPILE=/opt/eldk-5.1/powerpc-softfloat/sysroots/i686-eldk-linux/usr/bin/powerpc-nf-linux/powerpc-linux-
>
> thanks
>
> Érico V. Porto
>
>
>
> On Tue, Dec 27, 2011 at 11:24 AM, krish <radhakrishna.p at gmail.com> wrote:
>
>> You must set the environment variable CROSS_COMPILE in your shell and
>> export it. Or you can pass it as command line parameter in make command.
>> If CROSS_COMPILE is not set, u-boot takes ppc_8xx-gcc for ppc
>> architecture by default.
>>
>>
>> On Tue, Dec 27, 2011 at 6:30 PM, Érico Porto <ericoporto2008 at gmail.com>wrote:
>>
>>> Hello,
>>>
>>> I've been using u-boot with ltib for some time, but recently I decided to
>>> update it to a newer version. But I'm having problem building the u-boot,
>>> it says:
>>>
>>> /bin/bash: ppc_8xx-gcc: command not found
>>>
>>> I've downloaded the eldk5.1 for powerpc-softfloat from the ftp and
>>> installed using
>>>
>>> ./install.sh -s gmae -r basic powerpc-softfloat
>>>
>>> And runned the:
>>>
>>>  sh /opt/eldk-5.1/powerpc-softfloat/environment-setup-powerpc-nf-linux
>>>
>>> No success.
>>>
>>> Ideas?
>>>
>>> Érico V. Porto
>>>
>>> _______________________________________________
>>> eldk mailing list
>>> eldk at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/eldk
>>>
>>>
>>
>