[ELDK] ELDK-5.4 Compiler Installation Problem for ZYNQ Board (ERROR-127)

[Rama Chandra]

Hai,
I am using ZYNQ (ARM Cortex-A9) ZC706 Board. Actually i am installing
ELDK-5.4 based on Reference ELDK Doc But some time Error 127 coming. I
think Proper Export path not defined.

./install.sh -s gmae -r "minimal-dev minimal-dev minimal-xenomai
minimal-xenomai" armv6

export
PATH=/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin:/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin/arm-xilinx-linux-gnueabi-:$PATH

export ARCH=arm

export CROSS_COMPILE=arm-xilinx-linux-gnueabi-

source /opt/eldk-5.4/armv7a-hf/environment-setup-*

echo
'PATH=$PATH:/opt/eldk5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin:/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/bin/
export CROSS_COMPILE="arm-xilinx-linux-gnueabi-"
export ARCH=arm' > setup_eldk & chmod u+x setup_eldk

ls
source /opt/eldk-5.4/armv7a-hf/setup_eldk

Then after in U-Boot Board Configuring time Error 127 Coming

root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5# make
zynq_zc70x_config
Configuring for zynq_zc70x board...
root at caravel:/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5# make all
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
dirname: missing operand
Try 'dirname --help' for more information.
Generating include/autoconf.mk
/bin/bash: line 3: arm-xilinx-linux-gnueabi-gcc: command not found
Generating include/autoconf.mk.dep
/bin/bash: line 3: arm-xilinx-linux-gnueabi-gcc: command not found
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
dirname: missing operand
Try 'dirname --help' for more information.
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
/bin/bash: arm-xilinx-linux-gnueabi-ld: command not found
arm-xilinx-linux-gnueabi-gcc -DDO_DEPS_ONLY \
-g  -Os   -fno-common -ffixed-r8 -msoft-float  -fno-strict-aliasing
-mno-unaligned-access -D__KERNEL__
-I/home/ram/Desktop/ZYNQ/uboot-xilinx-v14.5/include -fno-builtin
-ffreestanding -nostdinc -isystem  -pipe  -DCONFIG_ARM -D__ARM__
 -march=armv5 -Wall -Wstrict-prototypes       \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
/bin/bash: arm-xilinx-linux-gnueabi-gcc: command not found
make: *** [lib/asm-offsets.s] Error 127

I am trying different ways but same problem coming sir.
-- 
Thanks & Regards,
RamaChandra PC
+918892147159.