[Test] [u-boot] u-boot timing analysis

[manohar kallutla]

Hi,

I am newbie to u-boot code. i have configure the 2009.08 u-boot code to my
board.

I want to identify the timing analyis for u-boot and linux. Could you please
let us know the way to find the timing of the u-boot

Assumption:-

Once the u-boot comes-up it gives the control to kernel ( As kernel comes-up
there is no u-boot in it). I want to know the u-boot time . In my u-boot
code RTC is not configured. I am trying to identify how to configure it.
please add your comments for
the same.

please find the logs from my board.


U-Boot 2009.08 (Apr 18 2011 - 21:50:59)

CPU: SH-4
BOARD: Evaluation Board
DRAM:  240MB
    Physical address
    0x40000000 - 0x4effffff : Accessible Space as ECC Area
    0x4f000000 - 0x5dffffff : No Access Area
    0x5e000000 - 0x5effffff : Non-ECC Area for DVC
    0x5f000000 - 0x5fffffff : Non-ECC Area for G200eR2
FLASH: 8MB
NAND: sh_onfi_wait_for_completion: timeout, wf = 4, src = 0, cmd = ff
        INTSRC = 0
        CMDEXECR = 2
        STATEMON = a2
        FIFOPMON = 0
previous comand is running...
No NAND device found!!!
0 MiB
In:    serial
Out:   serial
Err:   serial
manohar driver in sdhi_re
sh_mmcif: 0, sh-sdhi: 1
Net:   eth#0, eth#1
Hit any key to stop autoboot:  0

Thanks and Regards,
Manohar.K