[U-Boot-Users] Building for EVB64260

[Wolfgang Denk]

In message <NCBBIIOPCEBAMFLLKKBKIECFCGAA.RL at prodrive.nl> you wrote:
> 
> I've tried to build a BIN file for the EBV64260 Configuration
> 
> Steps:
> > CROSS_COMPILE=ppc74xx-

This line obviously contains  a  typo.  Pleae  make  sure  to  report
EXACTLY what you did, otherwise we cannot help.

> > make EBV64260_config
> rm -f include/config.h include/config.mk
> Configuring for EVB64260 board...
> > make all
> 
> Make runs a while then the following error occurs:
> 
> make[1]: Leaving directory `/ppc_sdev/u-boot-0.2.0/post/cpu'
> make[1]: Entering directory `/ppc_sdev/u-boot-0.2.0/examples'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/ppc_sdev/u-boot-0.2.0/examples'
> ppc_74xx-ld -Bstatic -T
> /ppc_sdev/u-boot-0.2.0/board/evb64260/u-boot.lds -Ttext 0xfff00000 -n
> cpu/74xx_7xx/start.o \
> 		--start-group board/evb64260/libevb64260.a cpu/74xx_7xx/lib74xx_7xx.a
> lib_ppc/libppc.a fs/jffs2/libjffs2.a fs/fdos/libfdos.a net/libnet.a
> disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a post/libpost.a
> post/cpu/libcpu.a common/libcommon.a lib_generic/libgeneric.a --end-group \
> 		-Map u-boot.map -o u-boot
> 

Which error? Everything looks fine.

> What can I do about that?

Nothing. Everything seems fine.

> Is there a possibility to start a configuration for our own board?

Yes, of course . See the README.

> If one of you has some recommended documentation??? I would be very happy
> with it!

See also: http://www.denx.de/re/DPLG.html

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
core error - bus dumped