[U-Boot-Users] unzip kernel error in lubbock platform

[seaman]

----- Original Message -----
From: "Zhao Hongda" <zhaohd at vis.cs.tsinghua.edu.cn>
To: <u-boot-users at lists.sourceforge.net>
Sent: Thursday, April 10, 2003 7:03 AM
Subject: [U-Boot-Users] unzip kernel error in lubbock platform


> I follow these steps:
> $ make zImage
> $ arm-linux-objcopy -S -O binary vmlinux linux
> $ gzip -vf9 linux
> $ mkimage -n name -A arm -O linux -T kernel -C gzip -a a0008000 -e
a0008000
> \
>      -d linux.gz linuxgz.image
>
> then load it follow these steps:
> =>loadb 0xa1000000
> =>bootm 0xa1000000
> ## Booting image at a1000000 ...
>    Image Name:   akzhd crazy
>    Image Type:   ARM Linux Kernel Image (gzip compressed)
>    Data Size:    791658 Bytes = 773.1 kB
>    Load Address: a0008000
>    Entry Point:  a0008000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... Error: inflateInit2() returned -4
> GUNZIP ERROR - must RESET board to recover
>
> Could someone tell me the detail step to create a usable uImage file,
> and how to load / run it?
> Thanks.
>                                     Hongda Zhao
>
>

    I think the problem may be the interface between the U-BOOT and the
LINUX,maybe not the step of creating image.

>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: ValueWeb:
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> No other company gives more support or power for your dedicated server
> http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>