AW: [U-Boot-Users] PC going backwards

[Georg Klug]

Hi Hebbar,

to me it looks like, that the HRCW contains something which does not allow
accessing the RESET Vector correctly. So, check your HRCW.

Georg

> -----Ursprungliche Nachricht-----
> Von: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net]Im Auftrag von S.
> Hebbar
> Gesendet: Dienstag, 12. August 2003 10:51
> An: u-boot-users at lists.sourceforge.net
> Betreff: [U-Boot-Users] PC going backwards
>
>
> Hello,
>
> Board: An 8260 based custom board with 64M of RAM. After board reset, the PC
> (Program Counter) start executing at 0x40000100 but the PC goes backwards. I
> also tried to trace using BDI "ti 0x40000100" with the same result.
>
> Let me know if you have faced the similar problem.
>
> Thanks,
> Hebbar.
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>