[U-Boot-Users] Patch: PCI mode indication for PQ2FADS-ZU

Wolfgang Denk wd at denx.de
Sun Aug 31 21:24:57 CEST 2003


In message <16178.7781.912832.378900 at gargle.gargle.HOWL> you wrote:
> 
> According to the MPC8260 User's Manual, PCI_MODE signal should be
> reflected in SCCR register, and local bus pins configuration is taken
> from HRCW and appears in SIUMCR. For some reason it does not work this
> way, so the only possibility to detect if the board is configured in PCI
> mode is to check the BCSR. The attached patch sets SCCR and SIUMCR
> according to the BCSR.

Added, thanks.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Celestial navigation is based on the premise that the  Earth  is  the
center  of  the  universe.  The  premise is wrong, but the navigation
works. An incorrect model can be a useful tool.   - Kelvin Throop III




More information about the U-Boot mailing list