[U-Boot-Users] Re: Ethernet on PPC Ebony not working

[Wolfgang Denk]

In message <3FBE4EAE.30700 at sysgo.com> you wrote:
>
> I guess you are using 10MB ethernet. In the 440 is between EMAC and PHY 
> inserted so called ZMII bridge, which can operate in several modes. If 
> is in the RMII mode then is necessary to set correct speed in the ZMII 
> Speed Select Register.
> The following patch will fix this problem.

Thanks, added.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
There are three ways to get something  done:  do  it  yourself,  hire
someone, or forbid your kids to do it.