[U-Boot-Users] Linux port for MPC855T

Steve Gray steve.gray at westell.co.uk
Fri Dec 12 16:15:26 CET 2003


I using a Vision ice probe II, as that what we had when we used vxWorks.
I used it from an NT workstation just to flash and get the u-boot registers
correct. Once u-boot is running i havnt used the probe.
U-boot has the capability to erase and program flash using serial or
network.
Worked for me.

Regards
	Steve


-----Original Message-----
From: David Aldrich [mailto:david.aldrich at t-modus.nec.co.uk]
Sent: 12 December 2003 15:13
To: 'Steve Gray'
Cc: 'u-boot-users at lists.sourceforge.net'
Subject: RE: [U-Boot-Users] Linux port for MPC855T


Hi Steve

I have another question if you don't mind.  Which hardware bring-up tool
do you use?  Being a Wind River user, we have a Vision Probe II.  I
believe that Wind River has a plan to upgrade this tool for use with
Linux, but I wonder if it is of use as is.  

I also see that Wolfgang Denk favours the BDI2000.

Do you have any comments please?

Best regards

David



Telecom MODUS is an ISO9001/TickIT approved Company.
LRQA Certificate of Approval reference 0965133
************************************************************
THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL TO WHOM IT IS
ADDRESSED AND CONTAINS INFORMATION THAT IS PRIVATE AND/OR PROPRIETARY.
If the reader of this message is not the intended recipient, or the employee
or agent responsible for delivering the message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying of
this communication is strictly prohibited.
If you have received this communication in error, please forward the whole
message to admin at t-modus.nec.co.uk
Company Registration No.3493954
Telephone Number +44 (0) 1372 381880
Fax Number +44 (0) 1372 381804
Email general at t-modus.nec.co.uk
************************************************************




More information about the U-Boot mailing list