[U-Boot-Users] U-Boot Not Loading Successfully

[Jeff Stevens]

I am porting U-Boot over to a new product and am
having some difficulty getting U-Boot to load
successfully.  I have placed our board on a logic
analyzer and found (based on System.map) that U-Boot
seems to crash in cpu/mpc8xx/cpu_init.c in function
cpu_init_f at lines:

memctl->memc_br0 = CFG_BR0_PRELIM;
memctl->memc_or0 = CFG_OR0_PRELIM;

Here is my board configuration:
CPU:   MPC855T
FLASH: AMD AM29LV040B (512kB 8-bit on CS0)
SDRAM: Micron MT48LC4M32 (16MB 32-bit on CS2)
NVRAM: Simtek STK14C88 (32kB 8-bit on CS4)

The board is set to have the IMMR come up at
0xFF000000 (on hard reset), and that is what I have
CFG_IMMR set to in my board configuration file.  Could
this be a problem with the placement of the IMMR.  I
previously had the IMMR at 0x00000000 on hard reset
and then moved it to 0xFA200000 with CFG_IMMR, which
had the same effect.  Or, could this be an issue with
my BR0 and OR0 settings?  I read something in that
file before those two lines above, which talked about
CFG_OR0_REMAP, but didn't quite understand it.  Should
I be using this?

Here are my BRx, ORx settings:
#define FLASH_BASE_PRELIM     0xFFF80000
#define CFG_PRELIM_OR_AM      0xFFFF0000
#define CFG_OR_TIMING_FLASH   (OR_CSNT_SAM |
OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX |
OR_EHTR)

#define CFG_OR0_PRELIM	      (CFG_PRELIM_OR_AM |
CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	      ((FLASH_BASE_PRELIM &
BR_BA_MSK) | (BR_PS_8 & BR_PS_MSK) | BR_V)


#define SDRAM_BASE_PRELIM     0x00000000
#define SDRAM_MAX_SIZE        0x01000000

#define CFG_OR_TIMING_SDRAM   (OR_G5LA | OR_G5LS)
#define CFG_OR2_PRELIM        (CFG_PRELIM_OR_AM |
CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM        ((SDRAM_BASE_PRELIM &
BR_BA_MSK) | BR_MS_UPMA | BR_V )

#define CFG_NVRAM_BASE        0xFA000000
#define CFG_OR4_PRELIM        (CFG_PRELIM_OR_AM |
CFG_OR_TIMING_FLASH)
#define CFG_BR4_PRELIM        ((CFG_NVRAM_BASE &
BR_BA_MSK) | (BR_PS_8 & BR_PS_MSK) | BR_V | OR_EHTR)

I would appreciate anyones input, since I'm not too
familiar with the U-Boot beyond the board specific
files.

Thanks in advance!

  -Jeff Stevens

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/