[U-Boot-Users] Flash

[Chris Elston]

Use cp to copy the data to flash (having first un-protected and erased it)

-----Original Message-----
From: Robert Schwebel [mailto:robert at schwebel.de]
Sent: 13 February 2003 13:37
To: U-Boot Mailing List
Subject: [U-Boot-Users] Flash


I'm wondering which command can be used to burn an image (loaded from
whereever) into flash? There's a command for erasing, protecting and
info but I cannot find something for flashing.  

Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Braunschweiger Str. 79,  31134 Hildesheim, Germany
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________

________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________