[U-Boot-Users] [PATCH] Fix OMAP1510 serial divisor settings.

[Wolfgang Denk]

In message <FD2AC9A020DDD51194710008C7089B200BEE21E0 at dlee17.itg.ti.com> you wrote:
>
> Here is a patch applied against u-boot-0.4.3 which enables changing the
> OMAP1510 baud rate.  I had forgot to clear the 6.5 divisor in cases where
> 115200 was not the target rate.  The register is write only so this is only
> way short of keeping a shadow register around for it...and its not worth it.

Thanks, added. Will push to CVS soon.


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
If I had to live my life again,  I'd  make  the  same  mistakes, only
sooner.                                          -- Tallulah Bankhead