[U-Boot-Users] JFFS2: CRC Problem with Kernel Image
Martin, Vitali
vmartin at init-ka.de
Tue Jul 22 13:48:01 CEST 2003
Hi all,
I have an PowerPC board running U-Boot and Linux. So I created an JFFS2 filesystem on one of my static MTD partitions an put the Kernel Image into.
bash-2.05# eraseall /dev/mtd1
Erased 4096 Kibyte @ 0 -- 100% complete.
bash-2.05# mount -t jffs2 /dev/mtdblock1 /mnt/
bash-2.05# cp /pImage /mnt/
bash-2.05# cd /mnt/
bash-2.05# ls -l
total 527
-rw-r--r-- 1 root root 539419 Jul 22 11:36 pImage
bash-2.05# cd ..
bash-2.05# umount /mnt/
Then I reboot my board and U-Boot starts.
I copy the Kernel Image to the memory with "fsload".
But running "iminfo" or "bootm" I get a CRC Error.
Some ideas what's wrong? (Thank you for any help.)
->ls
Scanning JFFS2 FS: . done.
-rw-r--r-- 539419 Tue Jul 22 15:42:25 2003 pImage
->fsload 100000 pImage
### JFFS2 loading 'pImage' to 0x100000
### JFFS2 load complete: 539419 bytes loaded to 0x100000
->iminfo 100000
## Checking Image at 00100000 ...
Image Name: Linux-2.4.4
Created: 2003-07-21 14:53:03 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 539355 Bytes = 526.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
->
More information about the U-Boot
mailing list