[U-Boot-Users] Debug symbols for start.S

[Wolfgang Denk]

Dear Mark,

in message <9901EE1E8F8BD3119109009027A1B5F596AE23 at DIGINET2> you wrote:
> 
> I have a problem which is causing me some headaches during my porting
> exercise, I am currently porting u-boot from the ep8260 to our own hardware.
> I am lucky enough to have not one but four Abatron probes however my problem
> seems to lie with gdb. 
> 
> I have compiled the u-boot code straight out of the box so to speak, so I
> haven't changed anything strange, however when I load gdb with the elf file
> I find that gdb cannot find the start.S file, it prompts the following:

This is probably a known problem. If you like, you can  try  out  our
latest  patches;  you  can  find  a  test version of our cross GDB at
ftp://ftp.denx.de/pub/tmp/ppc-linux-gdb - don't  forget  to  set  the
CROSS_COMPILE  environment  variable  as  needed (= ppc_82xx- in your
case) as with all our ELDK tools.


Please let me know if it works for you...


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
The night sky over the planet Krikkit is the least interesting  sight
in the entire Universe.
                 - Douglas Adams _Life, the Universe, and Everything_