[U-Boot-Users] mpc8245 Portx BAT setting...

[배장식]

I have tried to configure PortX for use of memory  space 0x7000_0000.  I have modified MCCR4[EXTROM] to  enable entened ROM.
but i can't accessed address 0x70000000 ...
i find something worng in include/config_Sandpint8245.h
according to define BATs in config_Sandpint8245.h 
not allocate BATs for address 0x7000000 , so i try change BAT1 for extended rom 
i modify ppcboot code to blow list

1. 0x40000000 used by initial stack , until sdram init....(BAT1 allocation)
2. command/board.c : board_init_r () this function use stack...in ram so no more need 0x40000000
3. my added code to BAT1 realloction for 0x70000000.. 
    void move_bat1 (void)
    {
    mtspr (IBAT1L, (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT));
    mtspr (IBAT1U, (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP));

    mtspr (DBAT1L, (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT));
    mtspr (DBAT1U, (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP));
    __asm__ __volatile__("eieio");
    __asm__ __volatile__("isync");
    __asm__ __volatile__("sync");

}

4. call move_bat1 at board_init_r ......

but...board not working.....



 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20030731/0f7683a1/attachment.htm