[U-Boot-Users] compressed/uncompressed kernel

[Wolfgang Denk]

In message <F509E6111989D311B63700805FA761DA06F9910F at dbde01.itg.ti.com> you wrote:
> 
>    I am able to get my kernel booted up if use the compressed kernel image
> (arch/arm/boot/compressed/vmlinux) to make the uImage.  But if I make uImage
> using the uncompressed kernel then it get stucks after it reaches the kernel
> entry point.  Has any one seen this kind of behaviour or am I expected to
> use only the compressed kernel image with u-boot.

We use both comrpessed and uncompressed kernels  on  several  boards.
You must be careful with load addresses to avoid overlapping.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
There is nothing in this world constant but inconstancy.      - Swift